4: Logo; 5: Video In & Out; 6: Audio Mixer; 7: Multi. Image - Datavideo HS-600 Instruction Manual

4: LOGO

This menu option allows the user to set up the LOGO function before it goes live in the PGM image of the
Multi-image Preview. A computer designed logo or station bug file can be saved to an SD card and loaded into
the HS-600 memory. The Logo can then be assigned to one of two buttons and overlaid on top of the Program
output. It is also possible to use the LOGO function like a second LUMA KEY feature and use a video source
input as the LOGO key source.
Press the SETTING button and then use the arrow buttons to highlight the LOGO item.

Press the ENTER button to confirm the selection.

You can also use the LOGO SETTING short cut button to get to this menu quickly.

The LOGO function is described in full from page 25.
5: VIDEO IN & OUT
This menu option allows the user to change the settings of video coming into or going out of the HS-600.
Press the SETTING button and then use the arrow buttons to highlight the VIDEO IN & OUT item.

Press the ENTER button to confirm the selection.

You are presented with four choices.

The video INPUT adjustment function is described from page 28.
The video OUTPUT choices are described from page 29.
How to ASSIGN VIDEO SOURCES is described on page 30.
How to adjust the setting of the HS-600 optional DV and SDI board is described on page 40.

6: AUDIO MIXER

This menu option allows the user to change the settings of audio coming into or going out of the HS-600. The
user can choose to delay the audio by up to 18 frames. The user also has the ability to decide which audio
channels will be used in the SDI output if the optional DV and SDI card is fitted to the mixer.
Press the SETTING button and then use the arrow buttons to highlight the AUDIO MIXER item.

Press the ENTER button to confirm the selection.

The AUDIO MIXER function is described in full from page 33.

7: MULTI. IMAGE

This menu option allows the user to set up the Multi-Image Preview including renaming the legends on each
input image 1~8.
Press the SETTING button and then use the arrow buttons to highlight the MULTI. IMAGE item

Press the ENTER to confirm the selection.

Adjusting the MULTI. IMAGE preview is described in full from page 36.
18