Rear Panel; Rear Panel Connections - Datavideo HS-600 Instruction Manual

Rear Panel

** HS-600 Rear panel shown with Optional DV and SDI output board fitted – please check with your dealer **
1. ITC-50 Belt Pack connectors incl. Tally
2. **Optional DV and SDI output board**
3. Video inputs, 2x DVI and 6x Composite
4. Aux 2 outputs, 2x Composite
5. Main outputs (PGM), 2x Composite
6. Aux 1 outputs, 2x Composite
7. Multi-Image Preview, 1x DVI
8. HDMI input – Monitor only – not mixed
9. GPI / GPO 3.5mm socket

Rear Panel Connections

10. RS-422 Remote
11. Power ON / OFF switch
12. DC input socket, 4pin XLR
13. Earth connector
14. Analogue audio outputs, 2x RCA, 2x XLR
15. Analogue audio inputs, 2x RCA, 2x XLR
Includes +48V switch for XLR inputs
Line, Mic +40, Mic +60 option on XLR inputs
ITC-50 Belt Pack 5pin XLR connectors
These eight connectors can each be connected by a
cable to a ITC-50 belt pack.
**Optional DV and SDI output board**
This board supplies 2x DV25 outputs and 2x SDI
outputs. Please check with your dealer as this card is
not fitted to all models.
DVI Inputs
DVI-D (Input 7) digital signal input connector.
DVI-I (Input 8) digital or analogue signal input
connector.
Resolutions of 1280x1024 @ 60Hz or 1024x768 @
60Hz should be compatible depending on your graphics
card or computer.
Composite (CV) Inputs 1~6
Composite video input: takes a BNC connector from the
composite output of a VCR, camera, DVD player, etc.
MAIN and AUX (BNC) Outputs
Two Composite (CV) outputs are provided for user
defined AUX1 and AUX2 outputs. Two Composite (CV)
BNC connectors are provided for MAIN / Program
output.
10