Table of Contents
Advertisement
Keyboard Controls – Special Effects
LUMA KEY PVW
When this button is engaged, the LUMA key function will display in the preview output (PST) window.
LUMA KEY ON
When this button is engaged, the LUMA key function will display on the program output (PGM) window.
PIP 1 ENABLE
Step.1 – Press PIP in the Sub Source row of buttons.
Step.2 – Press PIP 1 ENABLE and PIP 1 is now shown in PST Preview.
Step.3 – Press PIP SETTING in EFFECTS and adjust the PIP settings in the Multi-Viewer Status Display area.
Step.4 – If PIP 2 is required press PIP 2 ENABLE and adjust (see Step.3).
Step.5 – When happy with PIP layout in PST Preview then transition to PGM using T-Bar, TAKE or CUT button.
LOGO 1 / 2 ON
When this button is engaged, the LOGO 1 / 2 will display on PGM.
F1
This button is lock frame. You can lock the video frame on the Main or Sub Source. If you want to freeze a new
video frame, please press F1 button, unlock last frame picture.
F2
Item by item reset function.
AUX Source Selection
There are four Composite Auxiliary outputs on the rear of the HS-600. Two AUX1 outputs and two AUX2
outputs. It is possible to assign either a source input, background colour, Preview (PST) or Program (PGM) to
these outputs.
To assign a video source input to the selected AUX channel.
Step.1 - Press AUX1 SEL or AUX2 SEL key – Key will flash.
Step.2 - Press the input source number that you want to assign.
Step.3 - Press same AUX SEL key to stop key flash and exit Aux Source setting.
Alternatively to make the AUX output a dedicated Preview (PST) output.
Step.1 - Press AUX1 SEL or AUX2 SEL key – Key will flash.
Step.2 - Press the SUB key to the right.
Step.3 - Press same AUX SEL key to stop key flash and exit Aux Source setting.
Or to make the AUX output a dedicated Program (PGM) output.
Step.1 - Press AUX1 SEL or AUX2 SEL key – Key will flash.
Step.2 - Press the MAIN key to the right.
Step.3 - Press same AUX SEL key to stop key flash and exit Aux Source setting.
PIP 2 ENABLE
16
Advertisement
Table of Contents
