Table of Contents
Advertisement
System Information
The System Information Menu displays the Firmware Version of the monitor, and offers a Factory Reset option,
which will return all the settings of the monitor to the factory defaults.
To access the options for the selected setting press ENTER again, so that the option column is highlighted
Use the Up / Down buttons to navigate the available options.
You can choose:
To Factory Reset the monitor press the ENTER button, so that Factory Reset is highlighted, and then press
ENTER again to highlight the option. Use the UP / Down button to select YES from the options and then press
ENTER to reset the monitor. After a few seconds the monitor will be reset.
RS-422 Protocol
The HS-600 can be controlled remotely by computer using the RS-422 protocol for the SE-600 switcher. This is a
professional feature that requires programming and/or prior experience. Your dealer or local Datavideo office can
supply you with a copy of the separate RS-422 Protocol document which has been written with experienced system
integrators and programmers in mind. Please note Datavideo cannot offer training or bespoke software in regard to
this feature.
Dimensions
All measurements in millimetres (mm).
Black Light
Factory Reset
Firmware version
Panel Resolution
47
1=Dark (Min)
12=Bright (Max)
Yes / No
170H-110729-L
1600x900
Advertisement
Table of Contents
