Table of Contents
Advertisement
Store and recall function
The HS-600 has the ability to store your usual settings to one of three back up memory points within the unit. This
can be handy if you find someone has changed your usual set up and you need a quick way to get back to your
stored standard set up.
Alternatively you can use the system reset to return the mixer to the out of the factory default settings instead.
The store and recall function can also be used to update the firmware of the mixer. The firmware update process is
described later in this manual.
1: COUNT_DOWN_TIME
2: PIP
3: CG (LUMA KEY)
4: LOGO
5: VIDEO IN & OUT
6: AUDIO MIXER
7: MULTI. IMAGE
8: SYSTEM
9: STORE RECALL & UPDATE
10: RESET DVI_IN
ESCAPE
3: RESET ALL (Press '
to the mixers factory default values. It does not affect any audio or stored settings in the three backup memory slots.
2: UPDATE FIRMWARE – The firmware update process is described later in this manual, see page 39.
1: STORE & RECALL SETTING – Use the arrow buttons to highlight option 1 then press the ENTER button to
confirm the selection. The following options will then be displayed.
1: RECALL SETTING FROM – This option allows the user to recall the stored settings from one of three backup
memory slots. Use the up or down arrow keys to change the selected memory slot. Press enter to start the recall
process.
2: STORE SETTING TO – This option allows the user to store the current settings to one of three backup memory
slots. Use the up or down arrow keys to change the selected memory slot. Press ENTER to start the store process.
3: RESET CURRENT SETTING – This reset option allows the user to clear the current settings and return to the
factory default values. At the same time all backup memory slots are returned to their factory defaults also.
This feature effects all mixer video settings except the audio mixer settings which still need to be amended
manually.
When the SETTING button is pressed in the EFFECTS area of the
HS-600 keyboard the Main Menu list, shown left, is displayed between
the PST and PGM images on the Multi-Image Preview output.
Option 9: STORE RECALL & UPDATE allows the user to store the
current settings of the HS-600 mixer or recall them from its memory.
Use the arrow buttons to highlight option 9 then press the ENTER
button to confirm the selection.
The settings for the STORE RECALL & UPDATE are covered across
two menu pages. The first page of options is shown below.
1: STORE & RECALL SETTING
2: UPDATE FIRMWARE
3: RESET ALL
ESCAPE
►
' key 2 SEC.) – This reset option allows the user to clear any current settings and return
[ STORE & RECALL SETTING ]
1: RECALL SETTING FROM : BACKUP_1
2: STORE SETTING TO
3: RESET CURRENT SETTING : NO
ESCAPE
►
(Press '
' key 2 SEC.)
: BACKUP_3
38
Advertisement
Table of Contents
