Operation; Set Up Programmable Zone Sensor; Set-Up Procedures; Changing The System Setting - Trane X1379088401 Installation, Operation And Maintenance Manual

Operation

This section describes sensor operations, explains sensor symbols, and provides the default
settings.

Set-up Procedures

The following procedures show how to set up the programmable zone sensor for operation using
the keypad and display. Procedures begin at the home screen (see
Figure 5. Programmable zone sensor showing an example of the home screen on the display

Changing the System Setting

System in cooling mode
System in heating mode
Emergency heat (HP only). Used by facility
operators or service technicians only.
System Auto. The system automatically switches
between heating and cooling as needed.
System Off.
18
Temperature
System setting
Fan setting
Day and clock
Occupancy indicator
Keypad
Mo
. .
AM
1. From the home screen, select the system setting by
pressing twice.
2. Press or to select the desired system setting.
3. To confirm your setting, press
The home screen will apprear.
Figure 5).
or wait 10 seconds.
BAS-SVX17B-EN