Operation; Preprogrammed Settings - Trane TCONT800AS11AA Installation Instructions Manual

SET CURRENT DAY
SET MONTH
MON TUE
DONE
USE ARROWS TO SET YEAR AND TIME
MON
OK TO PICK MULTIPLE DAYS SCREEN LOCKED
CHANGE FILTER UV LAMP HUMIDIFIER PAD
DONE
Fig. 11. Setting calendar and time after initial
IMPORTANT
The tab on back of comfort control in lower-left
corner must be removed to activate this feature.
Using the Comfort Control
The comfort control has a touch screen interface. Words
or symbols appear, highlighting keys, as needed, to
complete tasks. Press keys with your fingertips. Sharp
tips on pens or pencils can damage the comfort control.
1. Use arrow keys to set Year, Month and Day (see
Fig. 11).
2. Press Done key.
3. Use arrow keys to set current time. See Fig. 11.
4. Press Done key.
TCONT800AS11AA TOUCH SCREEN PROGRAMMABLE COMFORT CONTROL
WED D THU FRI RI SAT A A T SUN
W WED THU FRI SAT A A T SUN
U
R
M22645
powerup.

OPERATION

System and Fan Settings
The System default setting is Heat and the Fan default
setting is Auto.
SYSTEM Settings
Heat: controls heating system.
Off: both heating and cooling are off.
Cool: controls cooling system.
Auto: automatically changes between heating and cooling
systems, depending on indoor temperature. (See Installer
Setup section.)
FAN Settings
The Fan setting can be programmed into the comfort
control schedule for each period (Wake, Leave, Return,
Sleep). See the Owners' Guide for additional information.

Preprogrammed Settings

Table 3 shows the default program settings. See Owners'
Guide for complete instructions on changing the program.
Table 3. Default Program Settings.
Schedule
Period Time
Wake 6:00AM
Leave 8:00AM
Return 6:00PM
Sleep 10:00PM 62°F
5
Setpoints
Heat Cool
70°F 78°F
(21°C) (25.5°C)
62°F 85°F
(16.5°C) (29.5°C)
70°F 78°F
(21°C) (25.5°C)
82°F
(16.5°C) (28°C)
Pub. No. 18-HD25D18-3
69-1787—03
Fan
Setting
Auto
Auto
Auto
Auto