Temporary Override Set-Up (Cv/Hp Only) - Trane X1379088401 Installation, Operation And Maintenance Manual

Operation

Temporary Override Set-up (CV/HP only)

To override a setting for a specified period of time, start at the home screen and proceed
as follows:
The heating setpoint symbol
flashes when selected.
The cooling setpoint symbol
flashes when selected.
The override symbol flashes
throughout the temporary
override set-up operation.
The fan setting flashes when
selected.
The time setting for override
set-up.
DAYS HOURS
The occupancy setting flashes
when selected.
The temporary override
symbol appears on the display
and stays on while an override
is present.
22
1. Press or . The current temperature setpoint
appears.
2. Within 5 seconds of
setpoint or to lower the setpoint. The thermostat
enters timed override mode, giving you the
opportunity to specify the other parameters of the
override.
• The override symbol flashes, and continues
flashing throughout the procedure.
• Either the heating or cooling setpoint symbol
flashes.
Note: The current zone temperature determines whether
the heating or cooling setpoint symbol appears first.
3. Press or to toggle between the heating and
cooling setpoints.
or to increase or decrease the heating
4. Press
or cooling setpoint.
5. To override the fan setting, press
the heating setpoint, press twice). Press
change between Auto and On.
Note: Only if the programmable fan option is enabled.
6. Press to specify the amount of time the override
lasts. Press or
If your override time is over 23 hours, press
select days. Press
days.
7. To override occupancy, press
days, press twice). The occupancy symbol flashes.
Press or to change between occupied and
unoccupied.
8. To confirm your override settings, press
2 seconds, or wait 15 seconds. The home screen
appears with the override symbol on it.
Note: To delete override settings, select temporary override
set-up and press the Test/Configuration button. The
home screen appears without the override symbol.
Step 1, press to raise the
(if starting from
to select the number of hours.
or to select the number of
(if starting from
BAS-SVX17B-EN
or to
or to
and hold