Applying Power To The Sensor - Trane X1379088401 Installation, Operation And Maintenance Manual

Installation

Applying Power to the Sensor

Restore power to the unit controller. The following sequence appears on the display:
•
Figure 2. Display with all the symbols appearing
•
•
•
Figure 3. Display at power-up
Mo
A. Home screen
12
The display lights up and all of the symbols appear for 2 seconds (see
Zone temperature and
setpoint temperature
System settings
Fan settings
Scheduling area/day and clock
Service indicator, filter timer,
keypad lockout, occupancy
indicator, temporary override
The software version appears for 2 seconds.
If the sensor has been in service for any length of time, the home screen appears (see
example). If the sensor is new, the configuration screen appears (see
are pressed for 90 seconds, the display returns to the home screen in constant-volume (CV)
configuration.
The light dims.
. .
AM
Mo Tu We Th Fr Sat Su
DAYS HOURS
B. Configuration screen
Figure 2).
.
AM
PM
Figure
Figure 3B). If no buttons
Option value
Option number
BAS-SVX17B-EN
3A