Using The Delay Function; Locking Out Channels Or Frequencies; Locking Out Channels - Radio Shack PRO-96 Owner's Manual

Using the Delay Function

You can configure your conventional, non-trunked channels for a 2 second delay to
avoid missing reply traffic on the same channel. When delay is set for a conventional
channel, the scanner will pause for reply traffic before resuming the scan operation.
To toggle the delay setting for a channel, press./DELAY
Notes
Delay is automatically set as the default for each channel when you turn on the
scanner.
The delay function operates differently when monitoring trunked radio systems. For
more information, see "Trunked Delay Function" on Page 85.

Locking Out Channels or Frequencies

You can lock out channels to force the scanner to skip and ignore any traffic while
scanning. You can also lock out up to 50 frequencies while searching to skip undesired
transmissions.

Locking Out Channels

To lock out a channel while scanning, press L/OUT when the scanner stops on the
channel. To lock out a channel manually, select the channel then press L/OUT so L
appears in the scanner's display.
Notes
You can still manually select and monitor locked-out channels.
Locking out a channel with an active trunking control channel will disable monitoring
of that trunking system.
To remove the lockout from a channel, manually select the channel and press L/OUT so
L disappears.
65