Locking Out Talk Group Ids; Delay Function In Id Indication Mode - Radio Shack PRO-97 Manual

Beyond the Basics

locking out talk group IDs

1. Press PGM.
You can only lock out talk group IDs when the scanner is
Notes Notes
in the closed mode (see "Open and Closed Modes").
2. Press TRUNK.
3. Press FUNC,
4. Press
e
5. Press L/OUT to lock out the ID. lo changes to LO.
6. To remove the lockout from a trunking ID, manually select
the ID memory, and press L/OUT. LO changes to lo.
You can confi rm the ID code while the scanner shows the
text when the received signal is a voice channel.
1. Press TEXT while the scanner is receiving the voice channel
and indicating the text name. The ID code appears as MOT:
XXXXXX, etc.
2. Press TEXT again to cancel.

delay function in ID indication mode

You can set the ID delay function separate from the channel
delay.
1. Press FUNC then ./DELAY while you are programming the
trunked ID. Use Up/Down keys to set ID Delay. ENTER key saves.
2.0 seconds appears.
2. Press
e
or 4.0 seconds.
or to move to the desired bank.
e d
or to select the ID memory.
d
or to select None, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5,
d
77