Assigning A Text Tag To A Group Id; Assigning A Text Tag To A Channel Storage Bank - Radio Shack PRO-96 Owner's Manual

Space is entered by pressing ./DELAY.
"C" is the third letter associated with 2 on the keypad. Press 2 then 3.
"h" is the second letter associated with 4 on the keypad. Press 4 then FUNC (for the
lower case set), then press 2.
Space is entered by pressing ./DELAY.
"6" is the sixth number associated with 1 on the keypad. Press 1 then 6.
5. Press ENTER to store the text with the channel.

Assigning a Text Tag to a Group ID

1. Press PGM.
2. Press TRUNK.
3. Press FUNC then
4. Press TRUNK to select the desired sub-bank.
5. Press or hold down
6. Press TEXT then enter the text using the numeral keys (see "Text Input Chart" on
Page 48). Use , , or CLR to edit your entry, or press and hold CLR to abort the text
entry.
Press ENTER to store the text with the ID.

Assigning a Text Tag to a Channel Storage Bank

1. Select a channel within the desired channel storage bank by pressing MAN and
entering the channel storage bank number (000 for bank 0 or 200 for bank 2, for
example). Press MAN again.
2. Press PGM.
or to select the desired bank.
or to select the desired group ID.
47