Deleting Frequencies From Channels; Special Features; Using The Delay Function; Locking Out Channels Or Frequencies - Radio Shack PRO-2053 Owner's Manual

Notes:
• You cannot turn off all banks. There
must be at least one active bank.
• You can manually select any channel in
a bank, even if the bank is turned off.
To turn on banks while scanning, press the
number key until the bank's number appears.
For example to turn bank 1 on again, press
.
1
ˆ

Special Features

USING THE DELAY FUNCTION

Note: Delay is automatically set as the de-
fault for each channel when you turn on the
scanner.
Many conversations might have a pause of
several seconds between a query and a re-
ply. To avoid missing a reply, you can pro-
gram a 2-second delay into any of your
scanner's channels. Then, when the scanner
stops on the channel,
scanner continues to monitor the channel for
2 seconds after the transmission stops be-
fore it resumes scanning or searching.
To turn delay on or off, press
LOCKING OUT CHANNELS OR
FREQUENCIES
You can scan existing channels or search
frequencies faster by locking out channels or
frequencies that have a continuous transmis-
sion, such as a weather channel.
26
appears and the
.
. /DELAY
Special Features
Deleting Frequencies from Chan-
nels
1. Press .
MAN
2. Use the number keys to enter the chan-
nel with the frequency you want to
delete.
3. Press again.
MAN
4. Press to enter the program mode.
PROG
changes to
) ) ) ) , , , ,
5. Press .
FUNC
6. Press . The frequency number
CLEAR
changes and
òôòòòò òôòòòò òôòòòò òôòòòòòôý

Locking Out Channels

To lock out a channel while scanning, press
when the scanner stops on the chan-
L/OUT
nel. To lock out a channel manually, select
the channel then press
Note: You can still manually select locked-
out channels.
To remove the lockout from a channel, man-
ually select the channel and press
disappears.
( ( ( (

Reviewing the Lock-Out Channels

To review all locked-out channels, press
, then repeatedly alternate between
MAN
pressing then
FUNC
locked-out channel. When you finish review-
ing locked-out channels, press

Locking Out Frequencies

To lock out a frequency during a search,
press when the scanner stops on that
L/OUT
.
appears.
òôý òôý òôý
so appears.
L/OUT
( ( ( (
L/OUT
to view each
L/OUT
.
MAN
so