Special Features; Using The Delay Function; Locking Out Channels And Frequencies; Locking Out Channels - Radio Shack Desktop Scanner Owner's Manual

200-channel vhf/air/uhf desktop scanner with wx alert
Hide thumbs Also See for Desktop Scanner:
Table of Contents

Advertisement

ˆ

Special Features

USING THE DELAY
FUNCTION
Many agencies use a two-way radio system
that has a period of several seconds
between a query and a reply. To avoid
missing a reply, you can program a 2–
second delay into any channel or frequency.
When your scanner stops on any channel or
frequency with a programmed delay,
appears and the scanner continues to
monitor that frequency for an additional 2
seconds after the transmission stops before
resuming scanning or searching.
You can program a 2 second delay in any of
these ways:
• If the scanner is scanning and stops on
an active channel, quickly press
before it continues scanning.
• If the desired channel is not selected,
manually select the channel, then press
.
DELAY
• If the scanner is searching, press
.
DLY
appears and the scanner
DELAY
automatically adds a 2-second delay to
every transmission it stops on in that
band.
To turn off the delay, press
scanner is monitoring the channel or
frequency.
DLY
disappears.

LOCKING OUT CHANNELS

AND FREQUENCIES
You can increase the scanning or search
speed by locking out individual channels or
frequencies that have a continuous
transmission, such as a weather channel
(see the "Weather Channel Frequency
20
Chart" on Page 19) or birdie frequency (see
"Birdie Frequencies" on Page 22).
Locking Out Channels
To lock out a channel while scanning, press
and release
stops on the channel.
To lock out a channel manually, select the
channel then press and release
DLY
RVW)
To unlock a channel, manually select that
channel again, then press
disappears from the display.
O
Notes:
• The scanner automatically locks out
DELAY
• You can still manually tune to locked-out

Locking Out Frequencies

To lock out a frequency during a service
bank, or a direct search, press
when the scanner stops on the frequency.
The scanner locks out the frequency then
continues searching. You can lock out
frequencies in both direct search and service
while the
DELAY
bank searches.
Note: You can lock out as many as 50
frequencies during a search. If you try to lock
out more,
"Reviewing Locked-Out Frequencies" on
Page 21and "Removing All Locked-Out Tags
From Frequencies" on Page 21).
Special Features
when the scanner
L/O (L/O RVW)
until
L/O
appears.
L/O (L/O RVW)
empty channels.
channels.
appears (see
FLo -FULL
L/O (L/O
.
L/
L/O (L/O RVW)

Advertisement

Table of Contents
loading

Table of Contents