Activating Id Lockout While Scanning; Reviewing Locked-Out Talkgroup Ids; Changing From Id Text Tag Display To Id Code Display; Trunked Delay Function - Radio Shack PRO-96 Owner's Manual

Activating ID Lockout While Scanning

When scanning a trunked radio system in Open Mode, you can lock out a trunked ID by
pressing L/OUT while the scanner is stopped on a voice call. If the ID has not been
previously entered into the ID list for that bank, it will be added and locked out
automatically.
When scanning a trunked radio system in Closed Mode, it is possible to lock out an ID by
pressing L/OUT while the ID is active with a voice call.

Reviewing Locked-Out Talkgroup IDs

You can easily review and clear locked talkgroup IDs in the ID list. This process is similar
to finding and clearing locked out conventional channels, except it is performed while in a
trunked ID list.
1. Press PGM then TRUNK.
2. Press FUNC, then L/OUT. The first locked out ID in the ID list is displayed.
3. Press L/OUT to unlock the selected ID, or press FUNC, then L/OUT again to continue
reviewing locked IDs.

Changing from ID Text Tag Display to ID Code Display

By default, your scanner displays the stored alphanumeric text tag when receiving a
trunked voice call. You can toggle the display to show the text tag or the talkgroup ID
code by pressing TEXT while the scanner is stopped on a trunked talkgroup call.

Trunked Delay Function

The trunking ID delay is set separately from the channel delay on a per channel storage
bank basis. Trunking ID delay specifies the amount of time the scanner dwells on the
control channel looking for reply traffic on the previous talkgroup before resuming scan
operation. Customizing the trunked ID delay may be useful if you are missing a lot of
reply traffic on a particular system. We recommend starting with the default value of 2.0
seconds.
1. While in the desired ID list, press FUNC, then ./DELAY.
85