Scanner Setup
Delay
Sometimes, several seconds can pass between
transmissions. To avoid missing a reply, a delay is
automatically set for each channel. The scanner
stops for 2 seconds after a transmission stops
before it resumes scanning or searching.
To turn the delay on or off:
Press FUNC •/Delay when the scanner stops on a
transmission. Lowercase
delay is off. Uppercase
Note: Delay and delay time can also be set in
each Scannable Object Menu. Search Delay time
can be set in the Global menu. Refer to "Appendix
B: Detailed Menu Reference" on page 102 for a
description of delay settings.
Adjusting the LCD Contrast
You can set the LCD contrast from level 1 to 7.
1. Press PGM for Program Mode.
2. Press
GLOB
3. Press p or q to scroll
4. Press t or u to select contrast level 1 to 7.
5. Press
SAVE
Turning the Key Tone On or Off
Each time you press any of the scanner's keys, the
scanner beeps.
To turn the scanner's key tone on or off:
1. Press PGM for Program Mode.
2. Press
GLOB
3. Press p or q to scroll
in the display indicates
d
indicates delay is on.
D
softkey to access Global menu.
CONTRAST
softkey to save new setting.
softkey to access Global menu.
Key Beeps
26
.
.