4.
TECH. REP. MODE
4-1.
Calling the Tech. Rep. Mode to Screen
NOTE
• Ensure appropriate security for Tech. Rep. mode function setting procedures. They
should never be known to any unauthorized person not involved with service jobs.
<Procedure>
1. Set up the Service Jig.
☞ See "Setting up the Service Jig." (D-2)
2. Click the Utility key.
3. Click the Meter Count key.
4. Click the following keys in this order.
→
→
→
Stop
0
0
5. The Tech. Rep. Mode menu will appear.
<Exiting>
• Click the Fin. Time key.
<Changing the Setting Value in Tech. Rep. Mode Functions>
• Use the ID key to change the + sign to - sign, or vice versa.
• Use the Up/Down key to enter or change the setting value.
• Use the 10-Key Pad to enter the setting value. (To change the setting value, first click the
Clear key before making an entry.)
→
→
Stop
0
1
S-18