Precautions For Use; Operating Environment; Power Requirements - Minolta CF2002 Service Manual

3.

PRECAUTIONS FOR USE

3-1. To ensure that the printer is used in an optimum condition
• Never place a heavy object on the printer or subject the printer to shocks.
• Insert the power plug all the way into the outlet.
• Do not attempt to remove any panel or cover which is secured while the printer is making
copies.
• Do not turn OFF the printer while it is making prints.
• Provide good ventilation when making a large number of copies continuously.
• Never use flammable sprays near the printer.
• If the printer becomes inordinately hot or produces abnormal noise, turn it OFF and
unplug it.
• Do not turn ON the power switch at the same time when you plug the power cord into the
outlet.
• When unplugging the power cord, do not pull on the cord; hold the plug and pull it out.
• Do not bring any magnetized object near the printer.
• Do not place a vase or vessel containing water on the printer.
• Be sure to turn OFF the power switch at the end of the workday or upon power failure.
• Use care not to drop paper clips, staples, or other small pieces of metal into the printer.
3-2.

Operating Environment

The operating environmental requirements of the printer are as follows.
• Temperature: 10 to 30 °C, 50 to 86 ° F
• Humidity: 25 to 85 % RH
• Rate of temperature change: 10 °C/h, 50 ° F/h
• Rate of humidity change: 20 % RH/h
3-3.

Power Requirements

The power source voltage requirements are as follows.
• Voltage fluctuation:
• Frequency fluctuation: 50/60 Hz ±0.3 %
AC110, 120, 220, 240 V
±10 % (printing performance assured)
(127 V areas only; between -10 % and +6 %)
+10 %
(paper feeding performance assured)
-15 %
G-4