Details Of Engine Setup Settings - Minolta CF2002 Service Manual

(3)

Details of Engine Setup Settings

Item
To set the size of the
Tray1 Setup
paper loaded in Tray 1.
To set the paper type for
the 2nd through 4th Draw-
ers.
Special Paper
To set the exit tray for PC
print outputs.
Output Tray
✽ When the FN-116 is
mounted
To select whether to
enable or disable the
crisscross sorting function
that stacks sorted copy
Crisscross sets in a crisscross man-
ner, i.e., one set stacked
lengthwise on top of
another set stacked
crosswise.
To select whether to enter
the Low-Power mode
after the last key has been
Low-Power operated with a print cycle
Mode completed, and to set the
time it takes the printer to
enter the Low-Power
mode.
To select whether to enter
the Sleep mode after the
last key has been oper-
ated with a print cycle
Sleep mode completed, and to set the
time it takes the printer to
enter the Sleep mode.
In the Sleep mode, only
the 5-V line remains ON.
To clear the life counters
Life Counter
for the Transfer Roller Unit
Clear
or Ozone Filter.
To set the screen pattern
Screen
in the PC print mode.
Pattern
Purpose
The default setting is Auto.
The default setting is Plain paper.
The default setting is 1 (Non-Sort Tray).
The default setting is Auto Change.
• Use the ▲ or ▼ key to enter the time before
• The default setting is "On" and "15 min."
• Use the ▲ or ▼ key to enter the time before
• The default setting is "On" and "30 min."
The default setting is Transfer Roller Unit.
The default setting is Gradation.
S-4
Setting/Precautions
Auto Inch
Plain
Not for 2-sided
Exclusive Plain
Recycled
1 (Non-Sort Tray)
2 (Elevator Tray)
3 (Option Tray)
Auto Change
Low-Power mode, which can range from 10
to 240 min.
On
15 min (10 to 240)
Sleep mode, which can range from 15 to 240
min.
On
30 min (15 to 240)
Transfer roller unit
Ozone filter
Gradation
Metric
No Change
Off
Off
Resolution