2-4.
REMOUNTING RAM IC (IC202)
1. Remove the Image Control Board (PWB-F) from the printer.
2. Demount RAM IC (IC202) from the old Image Control Board (PWB-F).
3. Demount RAM IC (IC202) from the new Image Control Board (PWB-F) and then
remount the old RAM IC (IC202) on the new Image Control Board (PWB-F).
NOTE
• If the Image Control Board (PWB-F) has been replaced and RAM IC (IC202) is not to be
remounted, be sure to record all data of Utility mode and Tech. Rep. mode functions and
make the entries again of these numeric values.
A
NOTE
• Align the portion marked with A of RAM IC (IC202)
with the mating portion as illustrated.
4002D255AB
D-13
4025D137AA