3.
UTILITY MODE
3-1.
Utility Mode Function Setting Procedure
<Procedure>
1. Set up the Service Jig.
☞ See "Setting up the Service Jig." (D-2)
2. Click the Utility key.
3. The Utility mode screen will appear.
<Exiting>
• Click the Fin. Time key.
<Changing the Setting Value in Utility Mode Functions>
• Use the ID key to change the + sign to - sign, or vice versa.
• Use the Up/Down key to enter or change the setting value.
• Use the 10-Key Pad to enter the setting value. (To change the setting value, first click the
Clear key before making an entry.)
S-10