Handling Of Consumables; Other Precautions; Led Radiation Safety - Minolta CF2002 Service Manual

4.

HANDLING OF CONSUMABLES

Before using any consumables, always read the label on its container carefully.
• Paper can be easily damaged by dampness. To prevent absorption of moisture, store
paper, which has been removed from its wrapper but not loaded in the drawer, in a
sealed plastic bag in a cool, dark place.
• Keep consumables out of the reach of children.
• Do not touch the PC Drum with bare hands.
• The same sized paper is of two kinds, short grain and long grain. Short grain paper
should only be fed through the printer crosswise, long grain paper should only be fed
lengthwise.
• If your hands become soiled with toner, wash them with soap and water.
• Do not throw away any used consumables (PC Drum, starter, toner, etc.). They are to be
collected.
• Do not burn, bury in the ground, or throw into the water any consumables (PC Drum,
starter, toner, etc.).
• Do not store consumables in a place which:
✽ Is hot and humid.
✽ Is subject to direct sunlight.
✽ Has an open flame nearby.
5.

OTHER PRECAUTIONS

CAUTION
Double pole / neutral fusing
ATTENTION
Double pôle / fusible sur le neutre.
6.

LED RADIATION SAFETY

• This product is a printer which operates by means of a LED (light emitting diodes) expo-
sure system. There is no possibility of danger from the LED optical radiation, because
the LED optical radiation level does not exceed the accessible radiation limit of class 1
under all conditions of operation, maintenance, service and failure.
G-5