Service Jig; Construction Of The Service Jig - Minolta CF2002 Service Manual

1.

Service Jig

1-1.

Construction of the Service Jig

(2)
(1)
No. Name
External panel Controller *1
1
Notebook PC
2 Straight cable
3 Aluminum tape
4 Selector
5 X-Rite/Cross-cable
6 Cross-cable
*1: The recommended OS of the operating environment for the External Panel Control is
Windows 98, Windows 2000, or Windows XP. No other OSs are guaranteed for correct
operation. Another requirement is that the PC is capable of serial communications at
19,200 bps.
(3)
(5)
(4)
(6)
Description
Allows settings, adjustments,
and checks to be made for the
printer using a PC.
Starts the External Panel Con-
troller for adjustment.
Connects between the Note-
book PC and the connector C of
the selector.
Removes noise that would oth-
erwise occur when the Selector
is operated.
Switches between the Note-
book PC and the X-Rite, printer.
• Color Tone Tester.
• Connects the Selector to X-
Rite (DTP32).
Connects port A of the Selector
to the printer.
D-1
(5)
C4581U018AA
Remark
Supplied from
Minolta
Commercially
available product
Commercially
available product
Commercially
available product
Commercially
available product
Commercially
available product
Commercially
available product