Setting the timer [Timer setting]
Set the time for each operation.
1
Click
Timer setting in the table of contents.
2
Set the time for the following operations respectively.
The setting range is displayed on the right side of each
*
input box.
•
[Call]:
Set the duration of call from door stations and room sub
stations to [Normal], [Priority] or [Urgent].
•
[Communication In Local]:
Set the duration of communication between stations.
•
[Paging]:
Set the duration of paging.
•
[Monitor]:
Set the duration of monitoring only one station.
•
[Scan monitor: Switching]:
Set the duration of monitoring each station while scan-
monitoring.
•
[Contact output]:
Set the duration of chime from the external sound source
1 and 2, triggered by contact output of the central control
unit (IS-CCU).
•
[Door release]:
Set the duration of door release.
If you set the time to "0", the door is released while
*
the door release button on the master station is held
down.
3
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
24
to save the current setting