Aiphone IS Series Setting Manual

Local system
Hide thumbs Also See for IS Series:
Table of Contents

Advertisement

IS SERIES
Commercial & Security Video Intercom system
Local System
SETTING MANUAL
Thank you for selecting Aiphone for your communication and security needs. Please read this manual and the separate
"OPERATION MANUAL" carefully before setting and using this system.
Refer to the provided "INSTALLATION MANUAL" for complete information regarding this system.
*
IMPORTANT
Please read and understand the system setting procedures before beginning the setup process.
834168 A 0211YZ

Advertisement

Table of Contents
loading

Summary of Contents for Aiphone IS Series

  • Page 1 Local System SETTING MANUAL Thank you for selecting Aiphone for your communication and security needs. Please read this manual and the separate “OPERATION MANUAL” carefully before setting and using this system. Refer to the provided “INSTALLATION MANUAL” for complete information regarding this system.
  • Page 2: Table Of Contents

    CONTENTS ABOUT THIS MANUAL ....3 Registering stations and PA outputs to zones [System setting – PURPOSE OF THE SYSTEM Zone setting] ....... 17 SETTINGS ........3 Registering sound files for chime [Chime setting – Registering SETTING LIST ......4 sound source] ......
  • Page 3: About This Manual

    ABOUT THIS MANUAL The IS system provides various manuals to meet various system planning and work processes. Use the manuals necessary for your system. Manual configurations The following manuals are provided for a local system. Read all the manuals for installing, setting up, and using a local system, or provide the manuals to the persons working with the system.
  • Page 4: Setting List

    (Unmodifiable) Administrator New administrator ID - Up to 16 alphanumeric characters setting Current Password Up to 16 alphanumeric characters - (aiphone) New Password Up to 16 alphanumeric characters New Password Up to 16 alphanumeric characters (Re-type) System setting Area registration...
  • Page 5 Title Sub title Item Sub item Setting range Default System setting Advanced station Video door Call priority Normal/Priority/Urgent Normal settings station/Audio Called stations (Set up to 20 master stations from the door station/ registered ones.) Room sub Contact type Normally open (NO) Normally open station /Normally closed (NC)
  • Page 6 Title Sub title Item Sub item Setting range Default System setting Advanced station Room sub (Contact output L1 to L4 settings control unit/ terminal) Add-on Contact type Normally open (NO)/Normally closed (NC) Normally open control unit (NO) Trigger condition None/Calling notice/Door release/PA None output Calling notice...
  • Page 7 Title Sub title Item Sub item Setting range Default Transfer setting Registering Schedule number DT1/DT2 schedule transfer Schedule name Up to 24 alphanumeric characters setting Call transfer time Hour: 0 to 23 Minute: 0 to 59 (Set to the Start time and End time individually.) Transfer schedule Weekly schedule...
  • Page 8: Starting Up The System

    STARTING UP THE SYSTEM Before making the system settings, confirm that a PC is connected to the central control unit (IS-CCU). The system settings are made on the PC by accessing the web browser for the settings incorporated with the central control unit (IS-CCU). System requirements for PC Your PC and operating environment must meet the following system requirements to make the settings.
  • Page 9: Setting The System Configuration [System Configuration]

    If you do not know your IP address assigned by DHCP, run “IS_IPSEARCH.exe” from the supplied CD-ROM, and then search for it. The login window of the web browser is displayed. Log in to the system by setting the following items. • Enter “aiphone.” • Password Enter “aiphone.” Login •...
  • Page 10: Making The System Settings

    MAKING THE SYSTEM SETTINGS The basic setting procedure When you have logged in to the system, the setting window appears. You can make the settings on this window. Make sure to refer to the on-screen instructions and comments displayed on each window when you make the settings. Depending on the PC and its OS or environment, the display may differ.
  • Page 11: Making Network Settings [Network Setting]

    Click Network setting in the table of contents. “aiphone” is preset as the default for both ID and password. Click Administrator setting in the table of contents. Make the settings on the following items displayed in the setting window.
  • Page 12: Registering Areas [System Setting - Area Registration]

    Registering areas Registering control units [System setting – Control units composition] [System setting – Area registration] Required Register all the control units connected to the central control Register areas for separating stations in the system. The unit. number to which a name is entered is registered as an area number.
  • Page 13: Registering Stations And Pa Outputs [System Setting - Registering Stations]

    Registering stations and PA outputs • Station name [System setting – Registering stations] Click to assign the same station name and sequential numbers to all the checked stations from the top down. Enter a station name only. Register all the stations and PA outputs connected in the system, and set the area, station no., station name (or PA Station type •...
  • Page 14: Making Detailed Settings To Stations And Control Units [System Setting - Advanced Station Settings]

    Making detailed settings to stations and Making detailed settings to door control units stations or room sub stations [System setting – Advanced station settings] NOTE: Make the settings to door stations or room sub stations Make detailed settings for the registered stations and control respectively.
  • Page 15: Making Detailed Settings To Master Stations

    Settings on [Contact input] window (for room Making detailed settings to master sub stations only) stations Make settings for contact input. • The following setting item buttons are displayed in the [Contact type]: “Advanced settings” window. Select either Normally open (NO) or Normally closed (NC). •...
  • Page 16: Making Detailed Settings To The Central Control Unit, Add-On Control Unit(S) Or Room Sub Control Unit(S)

    • [Sound source]: Making detailed settings to the central control Select either [Internal sound source] or [External unit, add-on control unit(s) or room sub sound source] as the source of chime. When [Internal sound source] is selected, select a sound file or control unit(s) sequence from the registered ones in the list.
  • Page 17: Registering Stations And Pa Outputs To Zones [System Setting - Zone Setting]

    Registering stations and PA outputs to zones Registering sound files for chime [System setting – Zone setting] [Chime setting – Registering sound source] Assign stations and PA outputs to the registered zones. Register sound data as the source of each chime. Copy MP3- format sound files onto the PC in advance.
  • Page 18: Registering Sound Sequences

    Registering sound sequences Registering daily chime schedule [Chime setting – Registering sound sequences] [Chime setting – Registering daily chime schedule] Register sound sequences for chime. Up to 10 daily schedules can be registered. Click Registering daily chime schedule in the table Up to 20 sequences can be registered.
  • Page 19: Setting Chime Schedule

    Settings on [Weekly schedule] setting window Setting chime schedule Select either [Every week] or [Every other week]. [Chime setting – Chime schedule setting] Set the schedule start and end dates. You can set a weekly chime schedule or individual daily The monthly calendar is displayed by clicking schedule.
  • Page 20: Registering Daily Transfer Schedule

    Registering daily transfer schedule Setting transfer schedule [Transfer setting – Registering daily [Transfer setting – Transfer schedule setting] transfer schedule] You can set a weekly transfer schedule and individual daily schedule. You can set the schedule for transferring calls to other master The settings can be made 1 year ahead.
  • Page 21: Setting The Timer [Timer Setting]

    Settings on [Weekly schedule] setting window Setting the timer [Timer setting] Select either [Every week] or [Every other week]. Set the time for each operation. Set the schedule start and end dates. Timer setting in the table of contents. Click The monthly calendar is displayed by clicking Refer calendar and you can select the start and end dates.
  • Page 22: Setting Time And Date [Time And Date Setting]

    Setting time and date Downloading/uploading setting data [Time and date setting] [Setting file] Set the time and date of the system, used for chime schedule You can download the setting data you have made into a file and transfer schedule. and save it on the PC.
  • Page 23: Maintenance

    You can reset the system settings to factory default. n Downloading updated firmware data Please access our web page at http://www.aiphone.net/ and Access the web browser and log in. download the firmware data on the PC to update the system.
  • Page 24 AIPHONE CO., LTD., NAGOYA, JAPAN AIPHONE CORPORATION, BELLEVUE, WA, USA AIPHONE S.A.S., LISSES-EVRY, FRANCE...

Table of Contents