Table of Contents
Advertisement
Quick Links
IS SERIES
Commercial & Security IP Video Intercom system
IS-SOFT
PC Master Station
SETTING MANUAL
Thank you for selecting Aiphone for your communication and security needs. Please read this manual and the separate
"OPERATION MANUAL" carefully before setting and using this system.
IMPORTANT
Please read and understand the setting procedures before beginning the setup process.
Please note that images and illustrations depicted in this manual may differ from the actual ones.
514426 A 0611YZ
Advertisement
Table of Contents
Related Manuals for Aiphone IS-SOFT 514426 A 0611YZ
Summary of Contents for Aiphone IS-SOFT 514426 A 0611YZ
- Page 1 IS-SOFT PC Master Station SETTING MANUAL Thank you for selecting Aiphone for your communication and security needs. Please read this manual and the separate “OPERATION MANUAL” carefully before setting and using this system. IMPORTANT Please read and understand the setting procedures before beginning the setup process.
-
Page 2: Table Of Contents
CONTENTS INTRODUCTION ... 2 UNPACKING ... 2 GETTING STARTED ... 3 SYSTEM CONFIGURATION EXAMPLE ... 3 CONNECTIONS ... 4 INSTALLING THE IS-SOFT ... 5 System requirements for PC ... 5 Installing ... 6 Uninstalling ... 6 Starting up the IS-SOFT ... 6 INTRODUCTION The IS system is a commercial and security video intercom system especially designed for applications in facilities such as offi... -
Page 3: Getting Started
GETTING STARTED SYSTEM CONFIGURATION EXAMPLE A PC master station can be used in either a standard (IP) system or a network direct system. A standard (IP) system consists of IP control unit(s), IP stations and local system(s). A network direct system consists of IP stations only. It includes no IP control unit, but needs at least one IP master station or IP door station. -
Page 4: Connections
CONNECTIONS Connect a PC on which you will install the IS-SOFT application to an IP network via a switch or hub. RJ45 Notes on CAT5e/6 cables A CAT5e/6 cable is not included in this product. • Do not bend the cables to an extent where the radius is less than 25 mm (1”). Communication failure could result. -
Page 5: Installing The Is-Soft
INSTALLING THE IS-SOFT Install the IS-SOFT on your PC from the DVD supplied with this product. You may need to log on to your PC as the Administrator to install the IS-SOFT. System requirements for PC Your PC must meet the following system requirements to use the IS-SOFT. Also refer to the instruction manual supplied with your PC. -
Page 6: Installing
PC master station before using it. When the settings have been correctly made, the color of “ Aiphone_PCMS " icon on the desktop. Aiphone_PCMS "All programs" "Local disc (C:)" "AIPHONE" "PCMasterStation.exe". ” icon changes from gray to blue. "Add... -
Page 7: Setting The Pc Master Station
SETTING THE PC MASTER STATION OUTLINE OF SETTINGS After installation of the IS-SOFT on the PC has fi nished, make the settings for the PC master station before using it. Make the settings by following the steps below. PRECAUTIONS: Be sure to make the settings before using the PC master station. If the settings have not been made, you cannot use the PC master station. •... -
Page 8: Making The Settings
MAKING THE SETTINGS The following describes the settings that can be made on the PC master station windows. First of all, start up the PC master station. Setting procedure The settings are made on the Volume control window and Setting window. First open either window from the Main window, and then make the settings displayed on the window. -
Page 9: Setting List
Setting list NOTES: The following list is a brief overview of the setting items available in the settings on the Setting window. The descriptions, and the style and • order of descriptions do not necessarily equate with the actual displays. Make a note of the setting results you have made, and keep it in a safe place not to lose it. -
Page 10: Adjusting Volumes
Adjusting volumes NOTES ON VOLUME ADJUSTMENT When talking, if you cannot hear audio from the target door station • or master station even after turning up the speaker volume, try turning down the microphone volume gradually. (The PC master station uses a hands-free system. If the microphone volume is too high, the talking might not switch to the receiver's side.) The microphone volume settings and the speaker volume settings •... -
Page 11: Making Preference Settings
Making preference settings Make the preference settings on the Setting window as shown below. Select the [Preference 1] or [Preference 2] tab and make the setting in the respective window. (See below for details about the settings.) ■ Settings on [Preference 1] Select the [Preference 1] tab in the Setting window. -
Page 12: Setting On [Preference 2]
■ Setting on [Preference 2] Select the [Preference 2] tab in the Setting window. [C] Display [Display language]: Select the language for displaying on the PC master station. [Un-answered call display]: Set whether or not to display the record of incoming call(s) automatically. -
Page 13: Searching For A Station, Zone Or Remote Site From The Search List
■ Searching for a station, zone or remote site from the SEARCH LIST You can select a station, zone or remote site registered to the system by using one of the search items in the SEARCH LIST. Click repeatedly to select the target search item SEARCH LIST (page 1/2) ◄... - Page 14 Searching for a station or zone in your site by entering the name [NAME SEARCH] Select [NAME SEARCH] from the SEARCH LIST. (→P. 13) Click to display the Dial keys window. Enter a name by using the dial keys. e.g.) When searching for "MASTER004";...
- Page 15 Searching for a station in your site by designating an area [STATIONS BY AREA] Select [STATIONS BY AREA] from the SEARCH LIST. (→P. 13) Click to select the target area in your site from the list (so that it is highlighted), and then click select.
-
Page 16: Making Transfer Settings
Making transfer settings You can transfer a received call to another master station, another site or a telephone number. NOTE: This setting can be made only when the System setting on a PC has been completed. Select the [Transfer] tab on the Setting window. Make the settings on this window. -
Page 17: Making Privacy Setting
Making privacy setting Setting of the privacy function is available when called from another master station. When the privacy mode is activated, the microphone turns off and you will not be heard by the caller. Item Description Privacy Sets whether or not to activate the privacy function. - Page 18 AIPHONE CO., LTD., NAGOYA, JAPAN AIPHONE CORPORATION, BELLEVUE, WA, USA AIPHONE S.A.S., LISSES-EVRY, FRANCE...