STARTING UP THE SYSTEM
Before making the system settings, confi rm that a PC is connected to the central control unit (IS-CCU). The system settings are made
on the PC by accessing the web browser for the settings incorporated with the central control unit (IS-CCU).
NOTE:
When you fi rst access the web browser for the settings, access it by the address (https://192.168.0.30) for IPv4 even though IPv6 is used in your
network.
System requirements for PC
Your PC and operating environment must meet the following system requirements to make the settings.
Network
Web browser
Starting up the system
1
Connect a PC to the central control unit.
[When connecting a PC to the central control unit
via a router]
RJ45
CAT5e/6
100m (330')
(Straight-through cable)
10BASE-T
/100BASE-TX
RJ45
NOTES:
Select this connection method when you will acquire an IP
•
address automatically by DHCP.
Do not select this connection method if your router does not
have a DHCP server function.
Be sure to connect the CAT5e/6 cable to the LAN ports of both
•
units.
10BASE-T Ethernet, 100BASE-TX Ethernet
IPv4
Internet Explorer 6.0 or later (with Internet Options SSL 3.0 enabled)
IPv6
Internet Explorer 7.0 or later (with Internet Options SSL 3.0 enabled)
RJ45
Router
100m (330')
CAT5e/6
(Straight-through cable)
10BASE-T
/100BASE-TX
RJ45
PC
[When connecting a PC to the central control unit
directly]
CAT5e/6 (Crossover cable)
100m (330')
10BASE-T/100BASE-TX
NOTES:
Select this connection method when using a static IP address.
•
When connecting a PC to the central control unit directly, use
•
an Ethernet crossover cable.
The IP address of central control unit is set to (192.168.0.30)
•
as default. Change the IP address of your PC if needed.
PC
RJ45
(Continued on next page)
9