Setting The Timer [Timer Setting]; Setting] - Aiphone IS SERIES Setting Manual

Setting the timer [Timer setting]

Set the time for each operation.
1 Click Timer setting in the table of contents.
2 Set the time for the following operations respectively.
* The setting range is displayed on the right side of each
input box.
• [Call]:
Set the duration of call from door stations and room sub
stations to [Normal], [Priority] or [Urgent].
• [Communication]:
Set the duration of communication between stations
in the local system [In Local], in the IP system [Via IP],
and communication with telephone [Telephone] (North
America only) respectively.
• [Paging]:
Set the duration of paging.
• [Monitor]:
Set the duration of monitoring only one station.
• [Scan monitor: Switching]:
Set the duration of monitoring each station while scan-
monitoring.
NOTE:
The actual duration slightly differs from the setting value.
• [Contact output]:
Set the duration of chime from the external sound source
1 and 2, triggered by contact output of the central control
unit (IS-CCU).
•
[Door release]:
Set the duration of door release.
If you set the time to "0", the door is released while
*
the door release button on the master station is held
down.
3
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
36
to save the current setting
Setting stations to receive calls and zones
to receive (chime) paging from remote
sites [Remote site pilot call setting]
Set the master stations and sub stations to receive calls, and
zones to receive (chime) paging from remote sites.
The setting can be made for each priority individually.
*
1
Click Remote site pilot call setting in the table of
contents.
2
Make the setting by clicking
M
the setting items ,
open the corresponding window.
M
N
O
P
Q
3
Make the setting in the displayed window(s).
See the detailed instructions for M
Q on the next page.
4
After the setting is fi nished on the corresponding
window, click Close to close the window.
5
Temporarily stored
Click
results temporarily.
* If you wish to cancel the setting results you have made,
click a title in the table of contents or "Refresh" in the
web browser menu.
Advanced settings
N O P Q
, , , respectively to
N O P
, , ,
to save the current setting
for
,