2
Press down the "I" side of POWER switch to turn on
all the control units in the system.
POWER switch
•
•
Confi rm that the following LEDs
*
operate as shown below.
Lights up.
Blinks
(When the system settings have
fi nished correctly, this LED turns from
blinking (initializing) to lighting.)
3
Start up the PC, and then open the browser window.
4
Enter the
static IP address (https://192.168.0.30/)
or the IP address assigned by DHCP to access the
web browser for settings.
If you do not know your IP address assigned by DHCP,
*
run "IS_IPSEARCH.exe" from the supplied CD-ROM,
and then search for it.
The login window of the web browser is displayed.
5
Log in to the system by setting the following items.
•
Select language
Select the language for displaying contents on the
setting windows.
•
ID
Enter "aiphone".
•
Password
Enter "aiphone".
Login
•
Click Login to display the setting window.
When you log in for the fi rst time, the [
*
window appears. Register your system as needed when
the IS-CCU is connected to the IP network.
10
Press down "I" side to turn on the
unit.
Press down "O" side to turn off the
unit.
Registration]
NOTES:
Be sure not to log in to the system more than once at the same
•
time by opening multiple browser windows on the PC.
<Only when IPv6 is used>:
•
When you access the web browser for settings after "IP
version" has been set to "IPv6" at [Network setting] (→P. 12),
access it from the assigned IP address or https://[fdc2::5000].
Setting the system confi guration
[System confi guration]
After logging in to the system, the [System confi guration]
window appears.
First of all, make the setting on this window before starting the
system settings.
1
Select your system between "Local system" and
"Standard system (IP system)".
2
Click
Temporarily stored
temporarily. (→P. 11)
3
Start the system settings by selecting a setting title in
the table of contents on the left side of the window.
Go to the next page.
to save the setting result