Standard (ip) system; connecting is local with is network based equipment (8 pages)
Summary of Contents for Aiphone IS SERIES
Page 1
#95500 IS SERIES IP Network Direct System QuikStart Programming Guide IS-MV, IS-IPMV 2-3/8" IS-DV, IS-IPDV 9-7/8" 1-1/2" PRIVACY TRANSFER LIST SETTING PQRS WXYZ ZOOM ADJUST WIDE MONITOR TALK 4-1/8" 1-1/8" ATTENTION: This is an abbreviated programming manual, addressing basic program settings for an IS-IP Network Direct System.
Step 10: Time and date setting - Updating the time and date displayed on the master(s). Step 11: Update the system with all stored data - Uploading all settings to the system. 2 | IS Series IP Direct System Programming Guide...
General Precautions HOW TO USE THIS GUIDE This guide is intended to be used for a single site IS-IP system that includes IS-IP door stations, IS-IPMV master stations, and IS-SOFT PC master stations. Note: When using the IS-IPC or when multiple sites are required, refer to the IS-IP Standard Setting Manual. IMPORTANT: When changes are made while programming, click Temporarily stored to save data prior to leaving each screen.
Page 4
B. A security certificate error message will appear. Click “Continue to this website.” C. Choose preferred language (see Figure 4.1). D. Log in to the unit using the default administrator ID “aiphone,” and default password “aiphone” (see Figure 4.2). Figure 4.1: Select Language Figure 4.2: ID and Password...
Page 5
C. Enter the Host unit IP address (This will be the Static IP address assigned to the host unit in Step 6). D. By default DHCP is utilized. Aiphone recommends assigning a static IP address by clicking the Static IP Address radio button and entering a unique IP address and Subnet Mask. (see Figure 5.1) E.
B. The Registering stations table will be populated based on the settings made in Step 7. Enter a Station number and Station name for each door/master unit (see Figure 8.1). C. Click Temporarily stored to save changes. Figure 8.1: Registering Stations 6 | IS Series IP Direct System Programming Guide...
Page 7
Step 9: Advanced Station Settings A. Select Advanced station settings from the menu on left. B. The Advanced station settings table is populated based on the stations registered in Step 8 (see Figure 9.1). C. To program a door, check box and click Advanced settings . A new window will open. If multiple units need to call the same master station(s), check appropriate units and click Advanced settings .
Page 8
Depending on the amount of data and changes, the reboot could take as long as 5-10 minutes. Aiphone Corporation 1700 130th Ave. NE Bellevue, WA 98005 0612 #95500 Ph: (800) 692-0200 Fax: (425) 455-0071 www.aiphone.com tech@aiphone.com 8| IS Series IP Direct System Programming Guide...