Standard (ip) system; connecting is local with is network based equipment (8 pages)
Summary of Contents for Aiphone IS SERIES
Page 1
0215 IS SERIES IP Network Direct System QuikStart Programming Guide PRIVACY TRANSFER LIST SETTING PQRS WXYZ ZOOM WIDE Programming Videos How-To Video Link ATTENTION: This is an abbreviated programming manual, addressing basic program settings for an IS-IP Network Direct System. A complete set of instructions...
LAN or a VPN that supports Multicast. To program, use a network switch and CAT-5e cable to connect the PC to each device one at a time. When using a PoE switch, an 802.3af compliant PoE Class 0 switch is required. Wiring Example: PoE Switch 802.3af compliant Programming PC Class 0 IS-IPMV - Host IS-IPDV - Client 2 | IS Series IP Direct System Programming Guide...
Video Link communicate with the stations in the system. A USB style microphone / headset is recommended. Click the Setting button and click the Network tab. Enter the Host’s IP address, the Connection password “aiphone” and choose the Network Interface Card from the drop down list. Enter the license key provided in the CD case (limit one per PC). Click Save . IMPORTANT: The software will attempt to make contact with the Host, but will give an error message because the Host isn’t set up yet. Ignore this error and proceed to Step 4: Log in to IS-IP Device.
F. Enter the Connection port and the Connection password for the system. G. Click Temporarily stored to save changes. H. Select Updating the system from the menu on the left. H. Repeat Steps 4 & 5 for all client devices, then do Step 4 to log in to the host. Figure 5.1: Network Setting - Client 4 | IS Series IP Direct System Programming Guide...
Page 5
Video Link B. Click the Host unit radio button. C. Enter the System name (max. 24 alphanumeric characters). D. DHCP is utilized by default. Aiphone recommends assigning a static IP address by clicking the Static IP Address radio button and entering a unique IP address and Subnet mask (see Figure 6.1). E. Enter a Unit name for the device (This is used for identifying the unit in programming only). F. Enter the Connection port and the Connection password for the system.
Step 7: IP Unit Registration - Host (cont.) D. Click Port number auto-setting to assign the required ports to all stations that need to communicate (see Figure 7.3). Figure 7.3: Port Number Auto-setting E. Click Temporarily stored to save changes. How-To Step 8: Registering Stations A. Select Registering stations from the menu on the left. B.
Step 9: Advanced Station Settings (cont.) D. Click Called stations (see Figure 9.2). A new window will open. Figure 9.2: Advanced Settings - Video Door Station E. Click Reference to open a new window and select the masters to be called by checking the box beside each unit (see Figure 9.3). Once the masters have been selected, click Close . Figure 9.3: Called Stations F.
Host Device cannot be acquired Connection password Retype the connection password in the network tab of IS-SOFT (default is aiphone). invalid The License key for IS-SOFT is case sensitive. Make sure it is entered as shown on the IS-SOFT: Invalid License Key entered license key document.