Settings Under [Optional Function Menu]; Registering Sound Fi Les For Chime; Sound Source]; Registering Sound Sequences - Aiphone IS SERIES Setting Manual

Settings under [OPTIONAL FUNCTION MENU]

Registering sound fi les for chime
[Chime setting – Registering sound source]
Register sound data as the source of each chime. Copy MP3-
format sound fi les onto the PC in advance. (Only MP3 fi les can
be registered in the system.)
* Up to 3MB of the total amount of fi les can be registered.
* Use sound fi les compliant with the specifi cations below.
Sound fi le specifi cations
Item
File name
File format
Bit rate
Sampling frequency
Channels
Maximum total data size
1
* : MP3-format sound fi les with tags may not be played with this
system. Before registering an MP3-format sound fi le, delete the
tag from the fi le.
1
Click Registering sound source in the table of
contents.
2
Click .
Add
Another window opens.
3
Click and select a sound fi le on the PC.
Browse...
4
Click to save.
Upload
When uploading the fi le is completed successfully, the
current window closes. In the previous window, the
selection result is displayed in the list.
If a small-size sound fi le is registered, a fi le size different
*
from the actual one may be displayed.
5 Repeat step 2 to 4 to register more sound fi les.
If you wish to delete a sound fi le, check it in the list, and
*
then click Delete .
20
Recommended value
Up to 24 alphanumeric characters
1
MP3*
64 kbps
44.1 kHz
1 ch (monaural)
3MB in total, 2MB/fi le

Registering sound sequences

[Chime setting – Registering sound sequences]
Register sound sequences for chime.
Up to 20 sequences can be registered.
*
1 Click Registering sound sequences in the table of
contents.
2 [Sound number]:
Select the sound number to register a sound sequence
from the pull-down menu.
3
[Sound sequence name]:
Enter the name of sound sequence.
4
Click to add sound fi les to the sound sequence.
Add
Another window appears.
5 [Step]:
Select an unused step number from the pull-down menu.
If the selected step number is already used, it can be set
*
with a new sound source and the old and subsequent
ones are renumbered with the following numbers.
If an unused number exists before the number you
*
selected, the unused number is re-selected automatically.
Up to 10 steps can be used.
*
6

[Sound source]:

Select a sound fi le from the registered ones and set the
repeating time (from 1 to 10) of the sound.
7 When you have fi nished the setting on this window,
click .
Close
In the previous window, the registered sound fi les are
displayed in the list.
8 Repeat step 2 to 7 to register more sound sequences.
Other buttons
Edit
•
If you wish to modify, check the fi le in the list, and then
click Edit .
Delete
•
When deleting an added sound fi le, check the fi le in the
list, and then click Delete .
9
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
to save the current setting