Setting The System Configuration [System Configuration] - Aiphone IS Series Setting Manual

2
Press down the "I" side of POWER switch to turn on
all the control units in the system.
POWER switch
•
•
Confirm that the following LEDs
*
operate as shown below.
Lights up.
Blinks
(When the system settings have
finished correctly, this LED turns from
blinking (initializing) to lighting.)
3
Start up the PC, and then open the browser window.
4
Enter the static IP address (https://192.168.0.30/)
or the IP address assigned by DHCP to access the
web browser for settings.
If you do not know your IP address assigned by DHCP,
*
run "IS_IPSEARCH.exe" from the supplied CD-ROM,
and then search for it.
The login window of the web browser is displayed.
5
Log in to the system by setting the following items.
• ID
Enter "aiphone."
• Password
Enter "aiphone."
Login
•
Click Login to display the setting window.
Press down "I" side to turn on the
unit.
Press down "O" side to turn off the
unit.
Setting the system configuration
[System configuration]
After logging in to the system, [System configuration] window
appears first.
First of all, make the setting on this window before starting the
system settings.
1
Select your system between "Local system" and
"Standard system (IP system)."
2
Click
Temporarily stored
temporarily. (→P. 10)
3
Start the system settings by selecting a setting title in
the table of contents on the left side of the window.
Go to the next page.
to save the setting result
9