Setting Configuration Commands In Test And Service Mode - Intermec 3400 User Manual

3400, 3440, and 3600 Bar Code Label Printer User's Manual
Resetting the Entire Memory on the 3400 Printer

Setting Configuration Commands in Test and Service Mode

Test and Service mode also provides you with an alternative to using PrintSet
or sending configuration commands down from the host. You can change these
configuration commands by setting the Test and Service mode DIP switches:
The following table provides you with the Test and Service mode DIP switch
settings for changing the configuration commands.
6-8
O
Label rest point
86XX emulation
X forms adjust
Y forms adjust
NugFont
HelvC
I O
I O
3XXXU.042
C o d e 39