Finishers - Intermec 3400 User Manual

HelvC
Coax Interface
The coax interface adapter allows the printer to emulate an IBM 3287 printer by
connecting the printer to IBM 3270 Type A coaxial cable computer systems
operating in the VTAM (CICS/IMS/TSO) or 8100 (DPPX) environments. With
the coaxial adapter you can connect the printer to an IBM 3174/76/99 system
controller/multiplexer.
Centronics Parallel Interface
The Centronics parallel interface allows only one-way communications with
the printer. You can either purchase the Intermec parallel cable (Part No.
051211), purchase the appropriate cable from your local computer store, or use
the following information to make your own interface cable.
Note: The maximum cable length for a parallel interface is 10 feet.

Finishers

Cutter
Use the cutter option to cut continuous media into individual labels ready for
use. This 3400C option works best for individual random lengths or short
batches of different label lengths. The cutter option must be ordered when you
order your 3400C printer.
Batch Takeup
This device automatically spools labels as they are printed. This attachment is
limited to small batches with maximum outer diameter (OD) of 5 inches.
Self-Strip Printing
Use self-strip printing in applications where you want to apply labels to a
surface immediately. After printing a label, the printer prints out the label with
the backing removed. This option must be ordered when you order your
printer.
C o d e 39
NugFont
A
Specifications
A-11