Maintenance Schedule - Intermec 3400 User Manual

3400, 3440, and 3600 Bar Code Label Printer User's Manual

Maintenance Schedule

Clean your printer regularly to maintain the quality of your labels and extend
the life of your printer. This table contains suggestions for cleaning the printer.
Use the illustration to locate the parts you need to clean.
Printer Component
Printhead
Printer Cover
Drive roller and tear bar
Media path (not shown)
Edge guide
Upper media guide
Lower media guide
Thermal transfer ribbon (TTR)
assist roller
Self-strip roller
Label gap sensor (not shown)
Label mark sensor (not shown)
Label taken sensor
Pinch roller
3-4
NugFont
HelvC
Maintenance Period
Inspect after every roll of media or ribbon. Clean
after every roll (or 6,000 inches) of media or more
often if necessary.
Clean as necessary.
Clean after every five rolls of media. If you are
using hi-tack adhesive, you must clean after every
roll of media. If you are using tag stock or
continuous media, you may want to clean after
every five rolls of media or as necessary. Clean
more often in environments that are harsh or
dusty.
C o d e 39