Making The Most Of Your Ram - Intermec 3400 User Manual

NugFont
HelvC

Making the Most of Your RAM

There are limits to the number of formats, fonts, graphics, or pages that you can
store in the printer. You can define up to 16 fonts, but there may not be enough
room depending on the amount of memory being used for other purposes. The
more formats, graphics, and fonts you store, the less memory is available.
When you run into a memory usage problem, use PrintSet to see how much
memory remains available. You must upload the memory information from the
printer first. For the 3400 and 3600 printers, you can adjust the amount of RAM
allocated for storage from 10K to an upper limit that is printer dependent.
If you find that it is necessary to increase your available memory, you can do
one of the following:
For the 3400 and 3600 printers, adjust the amount of RAM allocated for
storage purposes with the PrintSet software. You can also adjust the amount
of storage RAM with IPL commands. See the IPL Programming Reference
Manual for more information.
Increase the amount of available memory by using the Memory Reset
portion of the Test and Service menu. See "Resetting the Memory on Your
Printer" in Chapter 6 for more information.
Delete any unneeded user-defined fonts, graphics, pages, or formats. For
help, see the PrintSet software or the IPL Programming Reference Manual.
Purchase additional memory. Please contact your Intermec representative
for information on purchasing additional memory for the printer.
C o d e 39
Optimizing Printer Performance
5
5-9