Dhcp Server - Tenda AC1750 User Manual


User Name: Enter the PPPoE User Name provided by your
ISP. Consult your ISP if you are not clear.

Password: Enter the PPPoE Password provided by your ISP.
Consult your ISP if you are not clear.
 Address mode: Select "Dynamic" if you don't get any IP info
from your ISP, otherwise select "Static". Consult your ISP if
you are not clear.

IP Address: Enter the IP address provided by your ISP.
Consult your local ISP if you are not clear.

Subnet mask: Enter the subnet mask provided by your ISP.
Consult your ISP if you are not clear.

Default Gateway: Enter the gateway address provided by
your ISP. Consult your local ISP if you are not clear.

MPPE: Select whether to enable the MPPE authentication
method.

MTU: Maximum Transmission Unit.The factory default is
1492.
Note:
It is not advisable to change the factory default MTU value unless
necessary as an improper MTU value may degrade your network
performance or even lead to network malfunction.

4.3 DHCP Server

The Dynamic Host Configuration Protocol (DHCP) is an
Wireless AC1750 Dual-band Gigabit Router
38