Tenda AC1750 User Manual page 48


Filter Mode: Select Deny or Allow.

Enable: Check to enable or uncheck to disable a
corresponding filter rule （allow/disallow matched packets to
pass through router）.

Description: Briefly describe the current rule.

IP Group: Select an IP group for the corresponding rule to
apply to.

Time Group: Select a time group for the corresponding rule
to apply to.

WAN Port Range: Enter TCP/UDP protocol port number (s);
it can be a range of ports or a single port.

Protocol: Select a protocol or protocols for the traffic
(TCP/UDP/Both).
All client filter rules will be summarized in a list.

Client Filter: Check to enable the feature.

Default: Default filter mode; select Allow or Deny from the
drop-down list. For example, if Deny is selected from the
Wireless AC1750 Dual-band Gigabit Router
47