Tenda W311R User Manual
  1. Manuals
  2. Brands
  3. Tenda Manuals
  4. Wireless Router
  5. W311R+
  6. User manual

Tenda W311R User Manual

Wireless-n broadband router
Hide thumbs Also See for W311R:
Table of Contents

Advertisement

Quick Links

11N Wireless Broadband Router
1

Advertisement

Table of Contents
loading

Related Manuals for Tenda W311R

Summary of Contents for Tenda W311R

  • Page 1 11N Wireless Broadband Router...

  • Page 2: Copyright Statement

    As the upgrade of software and hardware, there will be changes. And if there are changes, Tenda is not responsible for informing in advance. If you want to know more about our product information, please visit our website at www.tenda.cn.

  • Page 3: Table Of Contents

    11N Wireless Broadband Router CONTENTS Chapter 1: Introduction .......... 1 1.1 Product Features........... 2 1.2 Package Contents ......... 4 1.3 LED Indicator and Port Description ....4 Chapter 2 Hardware Installation ......7 2.1 How to Install the Router ....... 7 2.2 Network Application Plan........
  • Page 4 11N Wireless Broadband Router 6.2 Wireless Security Setting ......32 6.3 Advanced Settings ........40 6.4 WPS Settings ..........42 6.5 WDS Settings ..........44 6.6 Wireless Access Control ........46 6.7 Connection Status........47 Chapter 7: DHCP Server ........48 7.1 DHCP Settings ..........48 7.2 DHCP List and Binding ........49 Chapter 8 Virtual Server ........
  • Page 5 11N Wireless Broadband Router 11.3 MAC Address Filter ........66 11.5 Remote Web Management ......68 11.6 Local Web Management.......69 11.7 WAN Ping..........70 Chapter12 Routing Setting ........71 12.1 Routing Table..........71 12.2 Static Routing..........71 13.1 Time Settings ..........73 13.2 DDNS ............74 13.3 Backup/Restore Settings ......76 13.4 Restore to Factory Default Setting ....78 13.5 Upgrade Firmware ........79 13.7 Password Change ........80...

  • Page 6: Chapter 1: Introduction

    11N Wireless Broadband Router Chapter 1: Introduction Thank you for purchasing Tenda 11N Wireless Broadband Router! W311R utilizes advanced MIMO technology and increases over 8 times transmission range of ordinary 802.11g products. Compatible with IEEE802.11n (Draft 4.0) and IEEE802.11g/b standards, it can provide up to 150Mbps stable transmission rate.

  • Page 7: Product Features

    11N Wireless Broadband Router computer’s downloading speed is supported as well. Moreover, UPnP and WMM support can smooth your MSN voice better, and the included Setup Wizard on CD-ROM will be easy and fast for non-savvy users to install the device and access to the Internet. Product Features Includes router, wireless access point, four-port switch and firewall in one...
  • Page 8 11N Wireless Broadband Router Ethernet LAN ports Supports xDSL/Cable MODEM, static and dynamic IP in community networking Supports remote/local Web management Supports WMM to better smooth your voice and video Supports SSID stealth mode and access control based over MAC address (up to 30 entries) Supports Auto MDI/MDIX Supports wireless Roaming technology for high-efficient wireless connections...

  • Page 9: Package Contents

    One Quick Installation Guide One Power Adapter One CD-ROM If any of listed items are missing or damaged, please contact the Tenda reseller from whom you purchased for replacement immediately. 1.3 LED Indicator and Port Description Front Panel and LED Indicator Show...
  • Page 10 11N Wireless Broadband Router When turns green, blinking indicates the system runs well. When blinking, it indicates the device is negotiating with client in WPS mode. WLAN Wireless signal LED indicator. When turns green, blinking indicates the wireless function is enabled. LAN (4,3,2,1) Wired local network LED indicator.
  • Page 11 11N Wireless Broadband Router use the included 9V DC power adapter. A 100Mbps Ethernet port, can be connected with MODEM, Switch, Router and other Ethernet device for Internet connecting to DSL MODEM, Cable MODEM and ISP. LAN (1, 2, 3, 4) 4 10/100Mbps Ethernet ports can be connected with Ethernet switch, Ethernet router and NIC card.

  • Page 12: Chapter 2 Hardware Installation

    11N Wireless Broadband Router Chapter 2 Hardware Installation 2.1 How to Install the Router After you unpack the box, please follow the steps below to connect. For better wireless performance, please put the device in the middle of wireless coverage area. Please use the included power adapter to power on the Router.
  • Page 13 11N Wireless Broadband Router Please connect your broadband line provided by your ISP to the WAN port. Insert the included CD-ROM into the CD-ROM drive, double click the “Setup” icon and follow the instructions to complete the installation. Or you can enter the Router’s Web page to configure it.

  • Page 14: Network Application Plan

    11N Wireless Broadband Router 2.2 Network Application Plan Usually wireless LAN Network is deployed in a planned environment where each access point is located in a steady place with certain wireless coverage area for communication service. Generally speaking, it is in the center of the area to reduce “dead spot”.

  • Page 15: Chapter 3 How To Login To The Router

    11N Wireless Broadband Router Chapter 3 How to Login to the Router The chapter mainly presents how to enter the Router’s Web page. After you have finished the hardware installation, the following steps will assist you to set the network configurations for you computer. 3.1 How to Set the Network Configurations 1.
  • Page 16 11N Wireless Broadband Router 2. Right click “Local Area Network Connection” and select “Properties”. 3 ． Select “Internet Protocol (TCP/IP)” and click “Properties”.
  • Page 17 11N Wireless Broadband Router 4 ． Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to save the configurations. Or select “Use the following IP address” and enter the IP address, Subnet mask, Default gateway as follows: IP Address: 192.168.0.XXX：(XXX is a number from 2~254) Subnet Mask: 255.255.255.0...

  • Page 18: Login To The Router

    11N Wireless Broadband Router 3.2 Login to the Router 1．To access the Router’s Web-based interface, launch a web browser such as Internet Explorer or Firefox enter Router’s default address, http://192.168.0.1. Press “Enter”.
  • Page 19 11N Wireless Broadband Router 2．Input the “admin” in both User Name and Password. Click “OK”. 3. If you enter the correct user name and password, the screen will be the next one.

  • Page 20: Chapter 4: Quick Setup Guide

    11N Wireless Broadband Router Chapter 4: Quick Setup Guide This chapter deals with how to access the Internet quickly. Please follow this guide to connect your Router to the Internet. 4.1 Setup Wizard Here is the “Welcome to Setup Wizard” for configuring your Router quickly.
  • Page 21 11N Wireless Broadband Router ADSL Virtual Dial-up (Via PPPoE) Enter the Account and Password provided by your ISP, and click “Next”. For example： Dynamic IP (Via DHCP) If your connection mode is Dynamic IP, it means your IP address keeps changing every time you connect. You do not need to enter the information like other modes.
  • Page 22 11N Wireless Broadband Router Static IP In this screen, fill the network address information from your ISP in the IP Address, Subnet Mask, Gateway and Primary DNS server fields and click “Next”. For example： ISP provides the following TCP/IP parameters as follows：...
  • Page 23 11N Wireless Broadband Router Click “Save” to complete the setup wizard. The Router will record the settings you made. To activate the settings, it is recommended to select “Reboot the Router” from “System Tool” of the left menu. It is rebooting now, please wait for a few minutes and DO NOT power off it.
  • Page 24 11N Wireless Broadband Router L2TP L2TP Server IP: Enter the Server IP provided by your ISP. User Name: Enter L2TP username. Password: Enter L2TP password. MTU: Maximum Transmission Unit, you may need to change it for optimal performance with your specific ISP. 1400 is the default MTU.
  • Page 25 11N Wireless Broadband Router PPTP PPTP Server IP: Enter the Server IP provided by your ISP. User Name: Enter PPTP username provided by your ISP. Password: Enter PPTP password provided by your ISP. Address Mode: Select “Static” if your ISP supplies you with the IP address, subnet mask, and gateway.

  • Page 26: Chapter 5: Advanced Settings

    11N Wireless Broadband Router Chapter 5: Advanced Settings 5.1 LAN Settings LAN Settings are for the basic TCP/IP parameters of LAN ports. MAC Address: The Router’s physical MAC address seen your local network, which unchangeable. IP Address: The Router’s LAN IP addresses (not your PC’s IP address).

  • Page 27: Wan Settings

    11N Wireless Broadband Router 5.2 WAN Settings After you have selected the ISP connection type in “Setup Wizard” and you want to modify the related settings, here you can modify and configure the settings in details. Virtual Dial-up（PPPoE） Connection Mode: Show your current connection mode.
  • Page 28 11N Wireless Broadband Router The default value is 1492. Do NOT modify it unless necessary. But if when some specific website or web application software can not be open or enabled, have a try to change the MTU value as 1450, 1400, etc.
  • Page 29 11N Wireless Broadband Router Static IP If your connection mode, static IP is chosen, you can modify the following addressing information. IP Address: Here enter the WAN IP address provided by your ISP. Subnet Mask: Enter the WAN Subnet Mask here.

  • Page 30: Mac Address Clone

    11N Wireless Broadband Router 5.3 MAC Address Clone This page is for the Router’s MAC address to WAN. Some ISPs require end-user's MAC address to access their network. This feature copies the MAC address of your network device to the Router. MAC Address: The MAC address to be registered with your Internet service provider.

  • Page 31: Dns Settings

    11N Wireless Broadband Router 5.4 DNS Settings DNS is short for Domain Name System (or Service), an Internet service that translate domain names into IP addresses which are provided by your Internet Service Provider. Please consult your Internet Service Provider for details if you do not have them.

  • Page 32: Wan Media Type

    11N Wireless Broadband Router 5.5 WAN Media Type In most cases, ISP provides wired WAN access (ADSL MODEM, Cable MODEM, etc.) and you only need to insert the line into the Router’s WAN port. Sometime, wireless WAN access type, more flexible and convenient, is also provided by some ISP.
  • Page 33 11N Wireless Broadband Router access to your ISP network. Click “Open Scanner’ to search the available SSID. MAC: Enter the MAC address of ISP wireless device. Click “Open Scanner’ to search the MAC address. Channel: Wireless device’s communication channel. Keep it the same channel with your ISP’s wireless device.

  • Page 34: Chapter 6: Wireless Setting

    11N Wireless Broadband Router Chapter 6: Wireless Setting 6.1 Basic Settings Enable Wireless: Check to enable the Router’s wireless features; uncheck to disable it. Network Mode ： Select one mode from the following. The default is 11b/g/n mode.
  • Page 35 11N Wireless Broadband Router 11b mode： Allow the wireless client to connect with the device in 11b mode at the maximum speed of 11Mbps. 11g mode： Allow the 11g/11n-compliant client device to connect with the AP at the maximum speed of 54Mbps. 11b/g mode: Allow the 11b/g-compliant client device to connect with the AP with auto-negotiation speed, and 11n...
  • Page 36 11N Wireless Broadband Router via wireless adapter, and configure PC1 and PC2 in the same segment. After the feature is enabled, two PCs can not communicate and share network resource each other, but they can communicate with wireless clients connected with AP2. This feature is to isolate the communication of wireless clients connected with the same SSID.

  • Page 37: Wireless Security Setting

    11N Wireless Broadband Router Channel： Specify the effective channel (from 1 to 13\Auto) of the wireless network. Extension Channel：To increase data throughput of wireless network, the extension channel range is used in 11n mode. Channel Bandwidth ： Select channel bandwidth to improve the wireless performance. When the network has 11b/g and 11n clients, you can select the 40M;...
  • Page 38 11N Wireless Broadband Router resources. Select Mixed WEP to enter the following window: Select SSID ： Select the SSID (main SSID or minor SSID) to configure security setting from the drop-down menu. Security Mode：From the drop-down menu select the corresponding security encryption modes. WEP Key1~4：Set the WEP key with the format of ASCII and Hex.
  • Page 39 11N Wireless Broadband Router 6.2.2 WPA-Personal WPA (Wi-Fi Protected Access), a Wi-Fi standard, is a more recent wireless encryption scheme, designed to improve the security features of WEP. It applies more powerful encryption types (such as TKIP [Temporal Key Integrity Protocol] or AES [Advanced Encryption Standard]) and can change the keys dynamically on every authorized wireless device.
  • Page 40 11N Wireless Broadband Router 6.2.3 WPA2- Personal WPA2 (Wi-Fi Protected Access version 2) provides higher security than WEP (Wireless Equivalent Privacy) and WPA (Wi-Fi Protected Access). Select SSID ： Select the SSID (main SSID or minor SSID) to configure security setting from the drop-down menu.
  • Page 41 11N Wireless Broadband Router 6.2.4 WPA- Enterprise This security mode is used when a RADIUS server is connected to the device. Select “WPA-Enterprise” from the drop-down menu to enter the following window: Select SSID ： Select the SSID (main SSID or minor SSID) to configure security setting from the drop-down menu.
  • Page 42 11N Wireless Broadband Router port of the Radius server. The default is 1812. Shared Secret ： Enter the shared key for authentication server with 8~63 ASCII characters. Session Timeout ： The authentication interval period between AP and authentication server. 6.2.5 WPA2-Enterprise This security mode is based on Radius authentication server and WPA2 encryption method.
  • Page 43 11N Wireless Broadband Router Select SSID ： Select the SSID (main SSID or minor SSID) to configure security setting from the drop-down menu. WPA Algorithms：Provides TKIP [Temporal Key Integrity Protocol] or AES [Advanced Encryption Standard]. The default is TKIP mode. Key Renewal Interval ：...
  • Page 44 11N Wireless Broadband Router port which allows all the messages to pass. If the port isn’t authenticated successfully, you can keep this port “disable” which just allows 802.1x authentication protocol message to pass. Select “802.1x” from the drop-down menu to enter the following window: Select SSID ：...

  • Page 45: Advanced Settings

    11N Wireless Broadband Router Session Timeout ： The authentication interval period between AP and authentication server. The default is 3600s. Note: To improve security level, do not use too easy characters. If you are not familiar with these ten security modes, recommended “WPA-Personal”...
  • Page 46 11N Wireless Broadband Router BG protection Mode: Auto by default. It is for 11b/g wireless client to connect 11n wireless network smoothly in a complicated wireless area. Basic Data Rates: For different requirement, you can select one of the suitable Basic Data Rates. Here, default value is (1-2-5.5.-11Mbps…).

  • Page 47: Wps Settings

    11N Wireless Broadband Router APSD Capable: It is used for auto power-saved service. The default is disabled. 6.4 WPS Settings WPS (Wi-Fi Protected Setting) can be easy and quick to establish the connection between the wireless network clients and the device through encrypted contents. The users only enter PIN code or press WPS button on the panel to configure it without selecting encryption method and secret keys by manual.
  • Page 48 11N Wireless Broadband Router WPS mode：Provide two ways: PBC (Push-Button Configuration) and PIN code. PBC：Select the PBC or press the WPS button on the front panel of the device for about one second (Press the button for about one second and WPS indicator will be blinking for 2 minutes, which means the WPS is enabled.

  • Page 49: Wds Settings

    11N Wireless Broadband Router WPS Auth. Mode ： The authorization mode deployed by WPS, generally WPA/WPA2-personal mode. WPS Encrypt Type：The encryption type used by WPS, generally AES/TKIP. WPS key ： The effective key generated by AP automatically. AP PIN（KEY）：The PIN code used by default. Reset OOB：...
  • Page 50 11N Wireless Broadband Router Lazy: In this mode, the connected device can be Bridge mode or Repeater mode and enter the Router’s BSSID to establish the connection. Bridge: You can wirelessly connect two or more wired networks via this mode. In this mode, you need to add the Wireless MAC address of the connecting device into the Router's AP MAC address table or select one from the scanning table.

  • Page 51: Wireless Access Control

    11N Wireless Broadband Router 6.6 Wireless Access Control To secure your wireless LAN, the wireless access control is actually based on the MAC address management to allow or block the specific clients to access the wireless network. Select “Wireless Setting->Access Control” to display the following screen: MAC Address Filter：Enable/disable MAC address filter.

  • Page 52: Connection Status

    11N Wireless Broadband Router 6.7 Connection Status This page shows wireless client’s connection status, including MAC address, Channel bandwidth, etc. Select “Wireless Setting->connection status” to enter the following screen: MAC Address：Shows current MAC addresses of the hosts connecting to the Router. Bandwidth ：...

  • Page 53: Chapter 7: Dhcp Server

    11N Wireless Broadband Router Chapter 7: DHCP Server 7.1 DHCP Settings DHCP (Dynamic Host Control Protocol) is to assign an IP address to the computers on the LAN/private network. When you enable the DHCP Server, the DHCP Server will allocate automatically an unused IP address from the IP address pool to the requesting computer in premise of activating “Obtain an IP Address Automatically”.

  • Page 54: Dhcp List And Binding

    11N Wireless Broadband Router 7.2 DHCP List and Binding The Static IP assignment is to add a specifically static IP address to the assigned MAC address. You can view the related information in the DHCP server list. IP Address: Enter the IP address which needs to be bound.

  • Page 55: Chapter 8 Virtual Server

    11N Wireless Broadband Router Chapter 8 Virtual Server 8.1 Single Port Forwarding The Router can be configured as a virtual server on behalf of local services behind the LAN port. The given remote requests will be re-directed to the local servers via the virtual server.
  • Page 56 11N Wireless Broadband Router example, port 21 for ftp service. Internal Port: This is the port number of LAN computer set by the Router. The Internet traffic from the external port will forward to the internal port. For example：you can set the internal port NO.66 to act as the external port NO.21 for ftp service.

  • Page 57: Port Range Forwarding

    11N Wireless Broadband Router 8.2 Port Range Forwarding This section deals with the port range forwarding mainly. The Port Range Forwarding allows you to set up a range of public services such as web servers, ftp, e-mail and other specialized Internet applications to an assigned IP address on your LAN.
  • Page 58 11N Wireless Broadband Router Protocol: Select the protocol (TCP/UDP/Both) for the application. Delete/Enable: Click to check it for corresponding operation. Well-Known Service Port: Select the well-known services as DNS, FTP from the drop-down menu to add to the configured one above. Add: Add the selected well-known port to the policy ID.

  • Page 59: Alg Service Settings

    11N Wireless Broadband Router 8.3 ALG Service Settings In the context of computer networking, an ALG or application layer gateway consists of a security component that augments a firewall or NAT employed in a computer network. It allows customized NAT traversal filters to be plugged into the gateway to support address and port translation for certain application layer "control/data"...

  • Page 60: Dmz Settings

    11N Wireless Broadband Router traffic for not meeting its limited filter criteria. Usually allowing client applications to use dynamic ephemeral TCP/ UDP ports to communicate with the known ports used by the server applications, even though a firewall-configuration may allow only a limited number of known ports.

  • Page 61: Upnp Settings

    11N Wireless Broadband Router DMZ Host IP Address: The IP address of the computer you want to expose. Enable: Click the checkbox to enable the DMZ host. IMPORTANT: When the DMZ host is enabled, the firewall settings of the DMZ host will not function. 8.5 UPNP Settings It supports latest Universal Plug and Play.

  • Page 62: Chapter 9 Traffic Control

    11N Wireless Broadband Router Chapter 9 Traffic Control 9.1 Traffic Control Traffic control is used to limit communication speed in the LAN and WAN. Up to 20 entries can be supported with the capability for at most 254 PCs' speed control, including for IP address range configuration.
  • Page 63 11N Wireless Broadband Router as HTTP service. IP Starting Address: The first IP address for traffic control. IP Ending Address: The last IP address for traffic control. Uploading/Downloading: To specify the traffic heading way for the selected IP addresses: uploading or downloading. Bandwidth: To specify the uploading/downloading Min.

  • Page 64: Traffic Statistics

    11N Wireless Broadband Router 9.2 Traffic Statistics Traffic statistics is used to show the LAN PC’s traffic information. Enable traffic statistics: check to enable traffic statistics. Usually traffic statistics is disabled, which can improve the Router’s data handling. The default is disabled. If it is enabled, the page will update the PC’s traffic information automatically and be refreshed every 5 seconds.

  • Page 65: Chapter10 Url Monitor

    11N Wireless Broadband Router Chapter10 URL Monitor 10.1 URL Monitor This feature is used to record user’s Internet activity, so in terms of this feature, the administrator can check out and control what they can do and have done. Enable URL Monitor: After checking this feature, the Router will record LAN computer’s URL information, including the visiting Website, your LAN IP address and the time.
  • Page 66 Receive E-mail Address: Input the received E-mail’s address here. example: tenda@sina.com.cn SMTP Server Address: Input the SMTP server address here. If you are not clear what your SMTP server’s address is, you can find them from Help page of the registered e-mail. For example: smtp.sohu.com, smtp.163.com, etc.
  • Page 67 11N Wireless Broadband Router Entry Triggering Interval: To set sending e-mail’s entry interval. The entry ranges from 100 to 500. For example: if you input 100 here, it means the Router will send a email from “Send Email Address” to “Receive Email Address” in every 100 entries.

  • Page 68: Client Filter Settings

    11N Wireless Broadband Router Chapter 11: Security Settings 11.1 Client Filter Settings To benefit your further management to the computers in the LAN, you can control some ports access to Internet by data packet filter function. Client Filter: Check to enable client filter. Access Policy: Select one number from the drop-down menu.

  • Page 69: Url Filter Settings

    11N Wireless Broadband Router Filter Mode: Click one radio button to enable or disable to access the Internet. Policy Name: Enter a name for the access policy selected. IP Start/End: Enter the starting/ending IP address. Port No.: Enter the port range based over the protocol for access policy.
  • Page 70 11N Wireless Broadband Router URL Filter: Check to enable URL filter. Access Policy: Select one number from the drop-down menu. Enable: Check to enable the access policy. Clear the Policy: Click “Clear” button to clear all settings for the policy. Filter Mode: Click one radio button to enable or disable to access the Internet.

  • Page 71: Mac Address Filter

    11N Wireless Broadband Router 11.3 MAC Address Filter In order to manage the computers in LAN better, you could control the computer’s access to Internet by MAC Address Filter. MAC Address Filter: Check to enable MAC address filter. Access Policy: Select one number from the drop-down menu.
  • Page 72 11N Wireless Broadband Router MAC Address: Enter the MAC address you want to run the access policy. Times: Select the time range of client filter. Days: Select the day(s) to run the access policy. Apply： Click to make the settings go into effect. For example: if you want to configure the host with MAC address 00:C0:9F: AD:FF:C5 not to access the Internet at...

  • Page 73: Remote Web Management

    11N Wireless Broadband Router 11.5 Remote Web Management This section is to allow the network administrator to manage the Router remotely. If you want to access the Router from outside the local network, please select the “Enable”. Enable: Check enable remote management.

  • Page 74: Local Web Management

    11N Wireless Broadband Router 0.0.0.0, it means all hosts in WAN can implement remote Web management. If you change the WAN IP address as 218.88.93.33-218.88.93.35, then only the IP addresses as 218.88.93.33, 218.88.93.34 and 218.88.93.35 can access the Router. For example: If you want to configure the IP address 218.88.93.33 to access the device’s web interface, please set it as follows: 11.6 Local Web Management...

  • Page 75: Wan Ping

    11N Wireless Broadband Router Enable: Check to enable the local web management. MAC1/2/3…: Enter the MAC addresses of LAN computers. Note： 1. In the default state, this feature is not enabled. All computers in the LAN can login the Web. 2.

  • Page 76: Chapter12 Routing Setting

    11N Wireless Broadband Router Chapter12 Routing Setting 12.1 Routing Table The main duty for a router is to look for a best path for every data frame, and transfer this data frame to a destination. So, it’s essential for the router to choose the best path, i.e.
  • Page 77 11N Wireless Broadband Router Destination LAN IP: The address of the remote host with which you want to construct a static route. Subnet Mask: The network portion of the Destination LAN IP. Gateway: The gateway of the next hop, usually the Router or host’s IP address.

  • Page 78: Time Settings

    11N Wireless Broadband Router Chapter 13 System Tools 13.1 Time Settings This section is to select the time zone for your location. If you turn off the Router, the settings for time disappear. However, the Router will automatically obtain the GMT time again once it has access to the Internet.

  • Page 79: Ddns

    11N Wireless Broadband Router 13.2 DDNS DDNS (Dynamic Domain Name System) supported in this Router. It is to assign a fixed host and domain name to a dynamic Internet IP address, which is used to monitor hosting website, FTP server and so on behind the Router.
  • Page 80 3322.org as follows: User name tenda Password 123456 Domain Name tenda.vicp.net After mapping the port in the virtual server, setting account information in DDNS server and in the address field entering http://tenda.3322.org, you can access the Web page.

  • Page 81: Backup/Restore Settings

    11N Wireless Broadband Router 13.3 Backup/Restore Settings The device provides backup/restore settings, so you need set a directory to keep these parameters. Backup Setting： Click “Backup” button to back up the Router’s settings and select the path for save. Click “Save” to save the configuration files.
  • Page 82 11N Wireless Broadband Router Restore Setting： Click “Browse” button to select the backup files. Click “Restore” button to restore previous settings.

  • Page 83: Restore To Factory Default Setting

    11N Wireless Broadband Router 13.4 Restore to Factory Default Setting This button is to reset all settings to the default values. It means the Router will lose all the settings you have set. So please Note down the related settings if necessary.

  • Page 84: Upgrade Firmware

    13.5 Upgrade Firmware The Router provides the firmware upgrade by clicking the “Upgrade” after browsing the firmware upgrade packet which you can download from www.tenda.cn. Browse: click this button to select the upgrade file. Upgrade: click this button to start the upgrading process.

  • Page 85: Password Change

    11N Wireless Broadband Router 13.7 Password Change This section is to set a new user name and password to better secure your router and network. User Name: Enter a new user name for the device. Old Password: Enter the old password. New Password: Enter a new password.

  • Page 86: Logout

    11N Wireless Broadband Router 13.8 System Log The section is to view the system log. Click the “Refresh” to update the log. Click “Clear” to clear all shown information. If the log is over 150 records, it will clear them automatically. Refresh: Click this button to update the log.

  • Page 87: Appendix 1：Glossary

    11N Wireless Broadband Router Appendix 1：Glossary Access Point(AP): Any entity that has station functionality and provides access to the distribution services, via the wireless medium(WM) for associated stations. Channel: An instance of medium use for the purpose of passing protocol data units (PDUs)
  • Page 88 11N Wireless Broadband Router WEP: Wired Equivalent Privacy (WEP) is the method for secure wireless data transmission. WEP adds data encryption to every single packet transmitted in the wireless network. The 40bit and 64bit encryption are the same because of out 64 bits, 40 bits are private.
  • Page 89 11N Wireless Broadband Router difficult for a hacker to learn the key and gain access to the network.WPA2 is the second generation of WPA security and provides a stronger encryption mechanism through Advanced Encryption Standard (AES), which is a requirement for some government users.

  • Page 90: Appendix 2: Ask And Question

    E-mail to support@tenda.cn, and we will reply you in the first time. 1、Can not login to the Web interface of the Router after you enter the IP address in the address field？...
  • Page 91 11N Wireless Broadband Router button for 7 seconds to restore to default settings. And then repeat the ping operation. If it still does not work, please contact us. 2、Forget the login password and can not enter the setting page. What can I do? Press the “RESET”...
  • Page 92 11N Wireless Broadband Router the recommended value as 1450 or 1400. 5 、 How to configure and access the Internet via Dynamic IP? In Setup Wizard of the Web utility interface, select “Dynamic IP” connection type and click “Save” to activate it.
  • Page 93 11N Wireless Broadband Router Step 4: input the internal Web service port, for example, Step 5: Input the internal server’s IP address. If your Web server’s IP address is 192.168.0.10, please input Step 6: select the communication protocol used by your internal host: TCP, UDP, ICMP.

Table of Contents