Web Utility Login - Tenda AC1750 User Manual

1) USB: USB port for connection to a USB device such as a
USB printer or storage device;
WAN: Internet port （RJ-45）for connection to an
2)
Internet-enabled xDSL Modem/Cable Modem or existing
Ethernet;
LAN/1/2/3: 3 LAN ports （RJ-45） for connection to PC's NIC
3)
or uplink to a hub, switch or wireless AP;
4) IPTV：IPTV port for connection to a network set-top box.
However such port can function as a LAN port if IPTV STB
port is not enabled;
5) WPS/Reset: WPS/Reset button; the WPS LED will display a
blinking light if you enabled the WPS function from device
web utility. Pressing this button for about 7 seconds restores
the Device to factory defaults.

2.4 Web Utility Login

The device's default IP is 192.168.0.1. You can change it to
accommodate your own needs. Here in this manual, we use the
default IP.
Connect you PC to the Device and config your PC's TCP/IP
settings following instructions in appendix 1 hereto. And then do
as follows to run a Ping command to test connectivity between
your PC and the Device.

Click "Start"-> "Run", input "cmd" and press "Enter".
Wireless AC1750 Dual-band Gigabit Router
11