Tenda AC1750 User Manual page 36


User Name: Enter your PPTP User Name.

Password: Enter your Password.
 Address mode: Select "Dynamic" if you don't get any IP info
from your ISP, otherwise select "Static". Consult your ISP if
you are not clear.

IP Address: Enter the IP address provided by your ISP.
Consult your local ISP if you are not clear.

Subnet Mask: Enter the subnet mask provided by your ISP.
Consult your ISP if you are not clear.

Default Gateway: Enter the gateway provided by your ISP.
Consult your local ISP if you are not clear.

Primary/Secondary DNS Server: Enter the Primary and
Secondary DNS Server Addresses. Consult your local ISP if
you are not clear.

MPPE: Select whether to enable the MPPE authentication
method.

MTU: Maximum Transmission Unit.The factory default is
1460.
5) L2TP: Select L2TP (Layer 2 Tunneling Protocol) if your ISP
uses an L2TP connection. The L2TP connects your router to a
L2TP server. For example：A corporate branch and
headquarter can use this connection type to implement mutual
and secure access to each other's resources.
Wireless AC1750 Dual-band Gigabit Router
35