Dhcp Server - Tenda 4G600 User Manual

2.6 DHCP Server

DHCP (Dynamic Host Configuration Protocol) assigns an IP addr ess to each
device on the LAN/private network. W hen you enable the DHCP Server, the
DHCP Server will automatically allocate an unused IP address from the IP
address pool specified in this screen to the requesting device as long as the
device is set to "Obtain an IP Address Automatically". If you disable this feature,
you have to manually configure the TCP/IP settings for all PCs on your LAN to
access the Internet.
Click Basic -> DHCP Server to enter the screen below. Here you can change
the DHCP IP address pool and lease time.
Configuration Procedures:
①
DHCP Server - Enable: Check/uncheck the box to enable or disable the
DHCP server feature.
②
Start IP/End IP: You can specify the starting and ending address es of the IP
address pool here. These addresses shoul d be part of the same IP address
subnet as the device's LAN IP address.
III Features & Configurations | Tenda
36