Port Mode - Tenda AC1750 User Manual

 WAN MAC Address: Config Device's WAN MAC address.
 Restore to Factory Default MAC: Reset Device's WAN MAC
to factory default.

Clone MAC: Click to copy your PC's MAC address to the
WAN MAC Address field on the Device.
Note:
1. Normally you don't need to change the default WAN MAC
value. However, some ISP may bind client PC's MAC address for
Internet connection authentication. In this case, simply enter
such MAC in the WAN MAC Address field or click the "Clone
MAC" button. Note that the WAN MAC address in "Status"
interface will be updated accordingly once you changed it.
2. Do remember to reboot the router to activate the new WAN
MAC. DO NOT use the "Clone MAC" feature unless required by
your ISP.
3. Only the MAC addresses of the PCs on LAN can be cloned to
the Device.

4.7 Port Mode

This page lets you set speed and duplex mode for device's WAN
Wireless AC1750 Dual-band Gigabit Router
42