Tenda AC1750 User Manual page 121

Wireless AC1750 Dual-band Gigabit Router
and high-density modulation (up to 256 QAM).
Channel
Channel
A communication channel, also known as channel, refers either
to a physical transmission medium such as a wire or to a logical
connection over a multiplexed medium such as a radio channel.
It is used to transfer an information signal, such as a digital bit
stream, from one or more transmitters to one or more receivers.
If there is only one AP in the range, select any channel you like.
The default is Auto.
If there are several APs coexisting in the same area, it is
advisable that you select a different channel for each AP to
operate on, minimizing the interference between neighboring
APs. For example, if 3 American- standard APs coexist in one
area, you can set their channels respectively to 1, 6 and 11 to
avoid mutual interference. Frequency interference rarely exists
over 5 G band, which has more channels and greater frequency
span.
SSID
SSID
Service set identifier (SSID) is used to identify a particular 802.11
wireless LAN. It is the name of a specific wireless network. To let
120