Tenda AC1750 User Manual page 83


Enable WPS: Select to enable/disable the WPS encryption.

WPS Mode: Select PBC (Push-Button Configuration) or PIN.

Reset OOB: When clicked, the WPS LED turns off; WPS
function will be disabled automatically; WPS server on the
Router enters idle mode and will not respond to client's WPS
connection request.
Operation Instructions:
PBC: (Before you start the following operations, make sure you
have enabled the WPS feature on the device from the web utility.)
Press the hardware WPS button on the device for 1 second and
if the WPS LED keeps blinking for about 2 minutes, it indicates
that PBC encryption mode is successfully enabled. And an
authentication will be performed between your device and the
other WPS/PBC-enabled wireless client during this time; if it
succeeds, the wireless client connects to your device, and the
WPS LED turns off. Repeat steps mentioned above if you want to
add more wireless clients to the device.
PIN: To use this option, you must know the PIN code from the
Wireless AC1750 Dual-band Gigabit Router
82