port. It is advisable to keep the default settings.
Auto: Keep the default of Auto, unless the cable to the WAN
port is excessively long, which may deduce drive capability.
10M full-duplex: Select to set WAN port to 10M full-duplex to
enhance the driving ability.
10M half-duplex: Select to set WAN port to 10M half-duplex.
If your WAN port is properly connected but does not function
correctly, it may be caused by poor driving capacity of the
cable. Please set the WAN port to 10M half-duplex to
improve drive capability.
100M full-duplex: Select to set WAN port to 100M
full-duplex.
100M half-duplex: Select to set WAN port to 100M
half-duplex.
1000M full-duplex: Select to set WAN port to 1000M
full-duplex.
1000M half-duplex: Select to set WAN port to 1000M
half-duplex.
Wireless AC1750 Dual-band Gigabit Router
43