Log Setting Screens - ZyXEL Communications ZyWALL USG 100 Series User Manual

Table 260 Maintenance > Log > View Log (continued)
LABEL
Search
Total Logging
Entries
entries per page
Page x of x
#
Time
Priority
Category
Message
Source
Destination
Note
The Web configurator saves the filter settings if you leave the View Log screen and return to it
later.

46.4 Log Setting Screens

The Log Setting screens control log messages and alerts. A log message stores the
information for viewing (for example, in the View Log tab) or regular e-mailing later, and an
alert is e-mailed immediately. Usually, alerts are used for events that require more serious
attention, such as system errors and attacks.
The ZyWALL provides a system log and supports e-mail profiles and remote syslog servers.
The system log is available on the View Log tab, the e-mail profiles are used to mail log
messages to the specified destinations, and the other four logs are stored on specified syslog
servers.
The Log Setting tab also controls what information is saved in each log. For the system log,
you can also specify which log messages are e-mailed, where they are e-mailed, and how often
they are e-mailed.
For alerts, the Log Settings tab controls which events generate alerts and where alerts are e-
mailed.
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Click this button to update the log using the current filter settings.
This is the number of logs recorded in the ZyWALL.
Select the number of log messages you would like to see on one screen. Choices
are: 30, 50, and 80.
This is the number of the page of entries currently displayed and the total number
of pages of entries. Type a page number to go to or use the arrows to navigate the
pages of entries.
This field is a sequential value, and it is not associated with a specific log message.
This field displays the time the log message was recorded.
This field displays the priority of the log message. It has the same range of values
as the Priority field above.
This field displays the log that generated the log message. It is the same value
used in the Display and (other) Category fields.
This field displays the reason the log message was generated. The text "[count=x]",
where x is a number, appears at the end of the Message field if log consolidation is
turned on (see Log Consolidation in
were aggregated to generate into this one.
This field displays the source IP address and the port number in the event that
generated the log message.
This field displays the destination IP address and the port number of the event that
generated the log message.
This field displays any additional information about the log message.
Chapter 46 Logs
Table 262 on page 731) and multiple entries
727