ZyXEL Communications ZyWALL USG 100 Series User Manual page 802

Appendix A Log Descriptions
Table 303 System Logs (continued)
LOG MESSAGE
%s is dead at %s
%s process count is
incorrect at %s
%s becomes Zombie at
%s
DHCP Server executed
with cautious mode
enabled
DHCP Server executed
with cautious mode
disabled
Received packet is not
an ARP response packet
Receive an ARP
response
Receive ARP response
from %s (%s)
The request IP is: %s,
sent from %s
Received ARP response
NOT for the request IP
address
Receive an ARP
response from the
client issuing the
DHCP request
Receive an ARP
response from an
unknown client
In total, received %d
arp response packets
for the requested IP
address
Clear arp cache
successfully.
Client MAC address is
not an Ethernet
address
802
DESCRIPTION
A daemon (process) is gone (was killed by the operating system).
1st %s: Daemon Name, 2nd %s: date and time
The count of the listed process is incorrect.
1st %s: Daemon Name, 2nd %s: date and time
A process is present but not functioning.
1st %s: Daemon Name, 2nd %s: date and time
When memory usage exceed threshold-max, memory usage reaches
%d%% :mem-threshold-max.
When local storage usage exceeds threshold-max, %s: Partition name
file system usage reaches %d%%: disk-threshold-max.
When memory usage drops below threshold-min, System Memory
usage drops below the threshold of %d%%: mem-threshold-min.
When local storage usage drops below threshold-min, %s:
partition_name file system drops below the threshold of %d%%: disk-
threshold-min.
DHCP Server executed with cautious mode enabled.
DHCP Server executed with cautious mode disabled.
A packet was received but it is not an ARP response packet.
The device received an ARP response.
The device received an ARP response from the listed source.
The device accepted a request.
The device received an ARP response that is NOT for the requested IP
address.
The device received an ARP response from the client issuing the
DHCP request.
The device received an ARP response from an unknown client.
The device received the specified total number of ARP response
packets for the requested IP address.
The ARP cache was cleared successfully.
A client MAC address is not an Ethernet address.
ZyWALL USG 100/200 Series User's Guide