Table 309 Interface Logs - ZyXEL Communications ZyWALL USG 100 Series User Manual

Unified security gateway
Hide thumbs Also See for ZyWALL USG 100 Series:
Table of Contents

Advertisement

Appendix A Log Descriptions
CODE
27
28

Table 309 Interface Logs

LOG MESSAGE
Interface %s has been
deleted.
AUX Interface dialing
failed. This AUX
interface is not
enabled.
AUX Interface
disconnecting failed.
This AUX interface is
not enabled.
Please type phone
number of interface
AUX first then dial
again.
Please type phone
number of Interface
AUX first then
disconnect again.
Interface %s will
reapply because Device
HA become active
status.
Interface %s will
reapply because Device
HA is not running.
Interface %s will stop
connect because Device
HA become standby
status.
Create interface %s
has been failed.
Base interface %s is
disabled. Interface %s
is disabled now.
Interface %s has been
changed.
Interface %s has been
added.
Interface %s is
enabled.
Interface %s is
disabled.
816
DESCRIPTION
Path was not verified.
Maximum path length reached.
DESCRIPTION
An administrator deleted an interface. %s is the interface name.
A user tried to dial the AUX interface, but the AUX interface is not
enabled.
The AUX interface is not enabled and a user tried to use the
disconnect aux command.
A user tried to dial the AUX interface, but the AUX interface does not
have a phone number set.
The AUX interface does not have a phone number set and a user tried
to use the disconnect aux command.
Device-ha became active and is using a PPP base interface, the PPP
interface must reapply, %s is the interface name.
Device-ha was deleted and free PPP base interface, PPP interface
must reapply, %s is the interface name.
When device-ha is stand-by and use PPP base interface, PPP
interface connection will stop, %s: interface name.
When PPP can't running fail, %s: interface name.
When user disable ethernet, vlan or bridge interface and this interface
is base interface of PPP or virtual interface. PPP and virtual will disable
too. 1st %s is interface name, 2nd %s is interface.
An administrator changed an interface's configuration. %s: interface
name.
An administrator added a new interface. %s: interface name.
An administrator enabled an interface. %s: interface name.
An administrator disabled an interface. %s: interface name.
ZyWALL USG 100/200 Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall usg 200 series

Table of Contents